tren - Advanced File Renaming
tren is a powerful command line file/directory renaming tool. It implements multiple, sophisticated renaming features than can be a bit complex to learn. For this reason, this document is split into two general sections: REFERENCE and TUTORIAL AND DESCRIPTION. If you are new to tren, start by studying the latter section first. It will take you from very simple- to the most complex renaming operations the program supports. Once you've got a sense of what tren can do, the reference section will be handy to look up options and their arguments.
Warning
tren is very powerful and can easily and
automatically rename things in ways you didn't intend.
It is *strongly* recommended that you try out new
tren operations with the '-t
' option on the command
line. This turns on the "test mode" and will show you
what the program would do without actually doing it.
It goes without saying that you should be even more
careful when using this program as the system root or
administrator. It's quite easy to accidentally rename
system files and thereby clobber your OS. You have been
warned!!!
tren.py [-aCcdfhqtvXx] [-A alphabet] [-I file] [-i range] [-P esc] [-R sep] [-r old=new] [-S suffix] [-w width] file|dir ...
You may specify tren options in one of three ways:
- On the command line
- In an "include" file specified with '
-I filename
' on the command line- Via the
$TREN
environment variable
Options specified on the command line are evaluated from left to right
and supercede any options specified in the environment variable.
Think of any options set in $TREN
as the "leftmost command line
options".
All options must precede the list of files and/or directories being
renamed. If one of your rename targets start with the '-
' character,
most command shells recognines the double dash as an explicit
"end of options" delimiter:
tren.py -opt -opt -opt -- -this_file_starts_with_a_dash
Some options below are "global" - they change the state of the entire
program permanently and cannot be undone by subsequent options. Some
options are "toggles", they can be turned on- and off as you move from
left- to right on the command line. In this way, certain options
(like case sensitivity, regular expression handling, and so on) can be
set differently for each individual renaming request ('-r
'). (If
you're very brave, you can select the '-d
' option to do a debug
dump. Among many other things, the tren debugger dumps the state
of each renaming request, and what options are in effect for that
request.)
-A alphabet Install a user-defined "alphabet" to be used by Sequence Renaming Tokens. The alphabet is specified in the form:
name:characterset
Both the name and the characterset are case- and whitespace-sensitive (if your shell permits passing spaces on the command line). The "0th" element of the alphabet is the leftmost character. The counting base is the length of
characterset
. So, for instance, the following alphabet is namedFoo
, counts in base 5 in the sequence,a, b, c, d, e, ba, bb, ...
:-A Foo:abcde
-a Ask interactively before renaming each selected file or directory.
(Default: off)This option is provided so you can toggle the program back to its default behavior after a previous '
-b
' or '-e
' on the command line.-C Do case-sensitive renaming
(Default: This is the program default)This option is provided so you can toggle the program back to its default behavior after a previous '
-c
' on the command line.This option is observed both for literal and regular expression-based renaming ('
-x
'). .-c Collapse case when doing string substitution.
(Default: Search for string to replace is case sensitive)When looking for a match on the old string to replace, tren will ignore the case of the characters found in the filename. For example:
tren.py -c -r Old:NEW Cold.txt fOlD.txt
This renames both files to
CNEW.txt
andfNEW.txt
respectively. Notice that the new (replacement) string's case is preserved.This option is observed both for literal and regular expression-based renaming ('
-x
').-d Dump debugging information
(Default: Off)Dumps all manner of information about tren internals - of interest only to program developers and maintainers.
-f Force renaming even if target file or directory name already exists.
(Default: Skip renaming if a file or directory already exists by the same name as the target.)
By default, tren will not rename something to a name that is already in use by another file or directory. This option forces the renaming to take place. However, the old file or directory is not lost. It is merely renamed itself first, by appending a suffix to the original file name. (Default: .backup, but you can change it via the '
-S
' option.) This way even forced renames don't clobber existing files or directories.-h Print help information. -I file "Include" command line arguments from
file
It is possible to perform multiple renaming operations in one step using more than one '
-r
' option on the tren command line. However, this can make the command line very long and hard to read. This is especially true if the renaming strings are complex, contain regular expressions or renaming tokens, or if you make heavy use of command line toggles.The '
-I
' option allows you to place any command line arguments in a separate file in place of- or in addition to the tren command line and/or the$TREN
environment variable. This file is read one line at a time and the contents appended to any existing command line. You can even name the files you want renamed in the file, but they must appear as the last lines of that file (because they must appear last on the command line).Whitespace is ignored as is anything from a
#
to the end of a line:# Example replacement string file # Each line appended sequentially # to the command line -xr t[ext]+=txt # Appended first -X -r =/MYEAR/ -r foo=bar my.file your.file # Appended last
You may "nest" includes. That is, you can include file
x
, that includes filey
, that includes filez
and so on. However, its easy to introduce a "circular reference" when you do this. Suppose filez
tried to include filex
in this example? You'd be specifying an infinite inclusion loop. To avoid this, tren limits the total number of inclusions to 1000. If you exceed this, you'll get an error message and the program will terminate.Note that wildcard metacharacters like
*
and?
that are embedded in filenames included this way are expanded as they would be from the command shell.-i instances Specifies which "instances" of matching strings should be replaced. (Default: 0 or leftmost)
A file may have multiple instances of the "old" renaming string in it. The '
-i
' option lets you specify which of these (one, several, all) you'd like to have replaced.Suppose you have a file called '
foo1-foo2-foo3.foo4
'. The leftmostfoo
is instance 0. The rightmost 'foo
' is instance 3. You can also refer to instances relative to the right. So the -1 instance is the last (rightmost), -2, second from the last, and so forth.A "range" of instances is specified using the '
:
' separator in the form:-i first-to-replace:stop-here
All instances from the "first-to-replace" up to, but NOT including "the stop-here" are replaced. '
-i :
' means "replace all instances.Examples:
tren.py -i 1 -r f=b foo1-foo2-foo3.foo4 -> foo1-boo2-foo3.foo4 tren.py -i -1 -r f=b foo1-foo2-foo3.foo4 -> foo1-foo2-foo3.boo4 tren.py -i 1:3 -r f=b foo1-foo2-foo3.foo4 -> foo1-boo2-boo3.foo4 tren.py -i -4:-2 -r f=b foo1-foo2-foo3.foo4 -> boo1-boo2-foo3.foo4 tren.py -i : -r f=b foo1-foo2-foo3.foo4 -> boo1-boo2-boo3.boo4
-P char Use ' char
' as the escape symbol. (Default: '\
')-q Quiet mode, do not show progress.
(Default: Display progress)Ordinarily, tren displays what it is doing as it processes each file. If you prefer to not see this "noisy" output, use the '
-q
' option. Note that this does not suppress warning and error messages.-R char Use ' char
' as the separator symbol in renaming specifications. (Default: '=
')-r Replace '
old
' with 'new
' in file or directory names.Use this option to specify which strings you want to replace in each file name. These strings are treated literally unless you also invoke the '
-x
' option. In that case, 'old
' is treated as a Python style regular expression.Both '
old
' and 'new
' may optionally contain Renaming Tokens described later in this document.If you need to use the '
=
' symbol within either the old or new string, simply escape it: '\=
'If it is convenient, you can change the separator character to something other than '
=
' via the '-R
' option. Similarly, you can change the escape character via the '-P
option.You can have multiple instances of this option on your tren command line:
tren.py -r old:new -r txt:doc old-old.txt
This renames the file to:
new-old.doc
Remember that, by default, tren only replaces the first (leftmost) instance of the old string with the new.
Each rename specifiation on the command line "remembers" the current state of all the program options and acts accordingly. For example:
tren.py -cr A=bb -Cr B=cc ...
The '
A=bb
' replacement would be done without regard to case (both 'A
' and 'a
' would match), where as the 'B=cc
' request would only replace 'B
'.-t Test mode, don't rename, just show what the program would do (ignores -q).
tren is very powerful and capable of doing nasty things to your files (like making a file disappear when another one is renamed over it). For this reason, it is helpful to test your tren commands before actually using them. With this option enabled, tren will print out diagnostic information about what your command would do, without actually doing it.
-v Print detailed program version information and exit. -X Treat the renaming strings literally
(Default: This is the program default)This option is provided so you can toggle the program back to its default behavior after a previous '
-x
' on the command line.-x Treat the old string in a '
-r
' replacement as a Python style regular expression for matching purposes.(Default: Treat the old string as literal text)
Warning
tren is a powerful file and directory renaming tool.
Be sure you know what you're about to do. If you're
not, run the program in test mode (invoke with the '-t
'
option) to see what would happen. You have been warned!
tren is a general purpose file and directory renaming tool. Unlike
commands like 'mv
', tren is particularly well suited for
renaming batches of files and/or directories with a single command
line invocation. tren eliminates the tedium of having to script
simpler tools to provide higher-level renaming capabilities.
tren will not allow you to rename a file or directory if one with
the new name already exists. Such attempts will cause no change to the
file or directory being processed and an error message will be
displayed. This is intentional to force you to manually rename or
remove the file or directory that would have been clobbered by a
rename. You can override this default and force a renaming and thus
the removal of such existing files or directories ('-f
' option).
tren supports a variety of renaming mechanisms. The one thing they have in common is that you must specify an old string which will be replaced by a new string when the file or directory is renamed. The general form is:
tren.py -r old=new <list of files, directories to rename>
The 'old
' and 'new
' renaming strings are built using a variety of
building blocks:
============================= ============================= Old Strings Are Built With: New Strings Are Built With:
-------------------------- -----------------------------
Literal Text Literal Text Regular Expressions Renaming Tokens Renaming Tokens ============================= =============================
You can use any of these building blocks alone or combine them to create expressive and powerful renaming schemes.
Literal String Substitution is just that - it replaces one literal string with another to rename the target file or directory. This is the most common, and simplest way to use tren. This is handy when you have files and directories that have a common set of characters in them you'd like to change. For instance:
tren.py -r .Jpeg=.jpg *.Jpeg
This would rename all files (or directories) whose names contained the
string '.Jpeg
' and replace it with '.jpg
'. Well ... that's not
quite right. Unless you specify the '-g
' option, only the first
(leftmost) instance of '``old``' is replaced with '``new``'.
It's important to realize that such a substitution takes place
anywhere in the file name, not just at the end or "extension" (as it
is called in Windows). You can limit the replacement to just the
"name" ('-b
') or "extension" ('-e
') portions of the filename.
You may specify multiple replacement operations ('-r
') on the tren
command line:
tren.py -g -r .Jpeg=.jpg -r old=ReallyOld *
This would rename all the files in the current directory, replacing
'.Jpeg
' with '.jpg
' and 'old
' with 'ReallyOld
' anywhere these
strings appeared in any of the file or directory names.
If you need to include the equals sign as part of the old string or
the new string literal text, you have to escape it ('\=
'):
tren.py -r name\=bob=name\=sally name=bob.dbms
This renames the file 'name=bob.dbms
' to 'name=sally.dbms
'.
Ordinarily tren treats both the old string you specify with the
'-r
' option literally. However, it is sometimes handy to be able
to write a regular expression to specify what you want replaced. If
you specify the '-x
' option, tren will treat your old string as
a Python style regex, compile it (or try to anyway!) and use it to
select which strings to replace. This makes it much easier to rename
files that have repeated characters or patterns, and groups of files
that have similar, but not idential strings in their names you'd like
to replace.
Say you have a set of files that are similar, but not idential in name, and you want to rename them all:
sbbs-1.txt
sbbbs-2.txt
sbbbbbbbbs-3.txt
Suppose you want to rename them, replacing two or more instances of
'b
' with 'X
'. It is tedious to have to write a separate literal
'-r old:new
' string substitution for each instance above. This is
where regular expressions can come in handy. When you invoke the
'-x
' option, tren understands this to mean that the 'old
'
portion of the replacement option is to be treated as a Python style
regular expression. That way, a single string can be used to match
many cases:
tren.py -x -r bb+:X *.txt
This renames the files to:
sXs-1.txt
sXs-2.txt
sXs-3.txt
Keep in mind that a literal string is a subset of a regular
expression. This effectively means that with '-x
' processing
enabled you can include both regular expressions and literal text in
your "old string" specification. The only requirement is that the
string taken as a whole must be a valid Python regular expression. If
it is not, tren will display an error message to that effect.
Because Python regular expressions can make use of the '=
' symbol,
you need a way to distinguish between an '=
' used in a regular
exression and the same symbol used to separate the old and new
operands for the '-r
' option. Where this symbol needs to appear in
a regular expression, it has to be escaped like this: '\=
'.
Regular expression processing is unaffected by the '-g / -1
' (global
rename) and '-c / -C
' (ignore case) options. That's because there
are regular expression mechanisms for achieving the same thing. More
importantly, if you've selected regular expression matching, it's
probably because you want very fine grained control of the renaming
defined by the regex. In short, regular expression matching always
takes place on the original characters of the target portion of the
name and does replacement as called for in the regex itself.
tren implements the notion of Renaming Tokens. These can
appear in either the 'old
' or 'new
' string components of a '-r
'
renaming argument.
It is sometimes useful to be able to take a group of files or directories whose names have nothing in common and impose a common naming scheme on them. Another use for renaming tokens is to do the renaming based on some property the file or directory possesses like its creation date, size, owner's name, and so on.
In their simplest form, renaming tokens are nothing more than
"canned" information tren knows about a particular file or
directory. For instance, if you insert the '/D/
' token into a
old- or new string definition, tren will replace it with the
creation date of the file or directory being renamed and use that
string in the renaming process.
There are also tokens that allow you to use system information in your renaming strings. Finally, there are tokens that can be used to automatically renumber or sequence (order) a set of files or directories being renamed.
For example, suppose you and your friends pool your vacation photos but each of your cameras uses a slightly different naming scheme. You might want to just reorder them by the date and time each picture was taken, for example. That way you end up with one coherent set of named and numbered files. You might start with something like this:
DSC002.jpg # Bob's camera, taken 1-5-2010 at noon
dc0234.Jpg # Mary's camera, taken 1-5-2010 at 8am
032344.jpeg # Sid's camera, taken 1-3-2010 at 4pm
It would be nice to get these in order somehow:
tren.py -r =/D/-MyVacation-/+T0001/.jpeg *.jp*
This would rename all the files in the current directory ending with
'.jp*
'. The '/D/
' would be replaced with the date the picture
was taken. The '/+T0001/
' refers to a starting sequence number to
uniquely identify pictures taken on the same date. The other strings,
'-MyVacation-
' and '.jpeg
', are inserted literally in the final
file names. After we ran this command, the files above would end up
with these names:
20100103-MyVacation-0001.jpeg # Sid's
20100105-MyVacation-0001.jpeg # Mary's
20100105-MyVacation-0002.jpeg # Bob's
Notice that the files taken on the same date have been sequenced by
the time-of-day they were taken because we included the '/+T0001/
'
renaming token in our pattern. The '+
' here means to construct
the sequence in ascending order. A '-
' would specify
descending order.
Note
Notice that there is no old string in our example above.
That is, there is nothing to the left of the '=
' symbol in
the '-r
' option. This effectively means "replace
everything" in the existing file or directory name. You can
do the same thing using a regular expression:
tren.py -x -r *=/D/-MyVacation-/+T001/.jpeg *.jp*
Of course, if you use the '-b
' or '-e
' flags, you limit
just what portion of the filename is considered
"everything".
Of course, you don't have to replace the entire filename when using tokens. It's perfectly legitimate to replace only a portion of the existing name:
tren.py -r file=/D/-file file-1 file.2
This would rename our files to: '20100101-file-1 and
20100101-file.2
' Notice that we combined literal text and a renaming
token to do this.
You can even use renaming tokens in your old string specification. For instance, suppose you manage a number of different systems and you set their system name in an environment variable called SYSNAME. You might then do something like this:
tren.py -x -r /$SYSNAME/*.bku=/$SYSNAME/*.bku.old
If your system name was "matrix", then the command above would only
rename files whose names began with 'matrix
' and ended with '.bku
'.
If your system name were "morton", then the command above would only
rename files whose names began with 'morton
' and ended with '.bku
'.
There are a couple of things to keep in mind when doing things like this:
- The '
/$SYSNAME/
' in the old string is used to find the text to rename, whereas the same renaming token in the new string means insert the contents of that environment variable here.- Renaming tokens are always evaluated before any regular expression processing takes place. It's up to you to make sure that when the two are combined (as we have in the example above), that the final result is still a valid Python regular expression. This may involve explicit quoting of the renaming tokens used in the old string specification.
tren has many other kinds of renaming tokens. Their structure and use is described in some detail in the section below entitled RENAMING TOKENS: THE GORY DETAILS.
tren defaults to a specific set of behaviors:
- '
old
' and 'new
' renaming text is treated literally- Renaming takes place within the entire filename
- Only the first instance of '
old
' is replaced with 'new
'- Renaming is case sensitive
There are command line "switches" to override each of these defaults
('-x
', '-b
', '-e
', '-g
', and '-c
').
There are additional "switches" to return the program to its
default behavior ('-X
', '-a
', '-1
', and '-C
').
The idea is that you can specify what kind of replacement behavior you want for each different renaming operation. For instance:
tren.py -e -r txt=TXT -g -a -c -r M=0 -C -x -r [ss]+=S filelist
This would rename the files as follows:
- The first instance of '
txt
' would be replaced with 'TXT
' in each of the file extensions.- All instances of '
m
' or 'M
' would be replaced anywhere they were found in the filename.- All instances of one or more strings in the form '
ss
' would be replaced with 'S
'.
It's important to understand some subtleties of just how tren works, particularly if you intend to create complex, multi-replacement command lines:
- Command line processing is from left to right. As we saw in the COMMAND LINE TOGGLES above, this means the options can be different for each renaming operating you specify.
- Regular expression processing is unaffected by the '
-g / -1
' (global rename) and '-c / -C
' (ignore case) options.- Filenames may be absolute, relative, or implict (to the current working directory). tren keeps track of this and can do renaming in directories other than the current one.
- tren processes each renaming string in the following manner:
Select the target portion of the filename for renaming (all, name only, extension only).
Replace all renaming tokens with their equivalent text in both the '
old
' and 'new
' renaming strings.If doing literal string replacement:
- If '
-c
' is in effect, collapse the target and the 'old
' renaming string to lower case before checking for a match.- Replace the first- (default and '
-1
') or all ('-g
') instances of 'old
' with 'new
'. 4)If doing regular expression processing, replace any regex matches with the corresponding '
new
' string. Keep in mind that if '-x
' is selected the entire 'old
' string is treated as a Python regular expression. Pay particular attention to this if you're combing literal text and/or renaming tokens with regular expression metacharacters.- When all the renaming operations are complete - and thus a new filename has been constructed - tren checks to see if a file or directory by that name already exists. Unless the '
-f
' flag is in force, tren will refuse to do a renaming over an existing filename. If the new filename does not exist, tren will attempt the renaming. If the rename fails for some reason - say you don't have permission to rename a particular file or directory - you'll see an error message to that effect.- By default, tren will stop processing on any error. You can override this with the '
-E
' option. In that case, an error message will be displayed. No matter what caused the error, tren will skip the file currently being processed and go on to the next one.
As we've just seen, a Renaming Token is nothing more than a string representing something tren knows about. These fit in one of three categories:
- An attribute of the file or directory being renamed
- An attribute of the underling operating system environment
- A sequence that reflects some ordering principle
Renaming tokens are delimited by the '/
' character. tren
replaces these tokens with the corresponding information (see
descriptions below) wherever you indicated in either the 'old
' or
'new
' strings of a '-r
' rename command.
Currently, tren defines a number of renaming tokens. Future releases of tren may add more of these, so it's good to periodically reread this material.
These tokens are derived from information about the file or directory being renamed.
/D/ File or directory creation date
This token is replaced with the date of creation
of the file or directory being renamed. It is
in 'yyyymmdd
' format.
/dd/ File or directory day of creation
This token is replaced with the the day of the month the
file was created in 'dd
' format.
/dy/ File or directory day of creation
This token is replaced with the the name of the day the
file was created in 'Ddd
' format.
/E/ Original File Extension
This token is replaced the "extension" portion of the file or directory before renaming. This does not include the extension separator string.
/F/ Original File Name
This token is replaced the "name" portion of the file or directory before renaming.
Note
Notice that there is no token for the whole filename
because you can always synthesize it with '/F/./E/
'
/G/ File or directory primary group name
This token is replaced with the name of the primary group to which the file belongs.
/hh/ File or directory hour of creation
This token is replaced with the hour the file was
created in 'hh
' format.
/I/ File or directory creation date in ISO format
This token is replaced with the date of creation of the file or directory being renamed. It is similar to '/D/
' except it is in ISO format, 'YYYY-MM-DD
'.
/L/ File or directory length
This token is replaced with a numeric string that indicates the length of the file or directory in bytes.
/mm/ File or directory minutes of creation
This token is replaced with the minutes the file was
created in 'mm
' format.
/mo/ File or directory month of creation
This token is replaced with the numeric month the file was
created in 'mm
' format.
/my/ File or directory month of creation
This token is replaced with the abbreviated name of the
month the file was created in 'Mmm
' format.
/ss/ File or directory seconds of creation
This token is replaced with the seconds the file was
created in 'ss
' format.
/T/ File or directory creation time
This token is replaced with the time of creation of the file or directory being renamed. It is in 'hh:mm:ss
' format. This is equivalent to '/hh/:/mm/:/ss/
'.
/U/ File or directory owner name
This token is replaced with the name of the file or directory's owner.
/yyyy/ File or directory year of creation
This token is replaced with the year the file was
created in 'yyyy
' format.
These tokens are derived from the underlying operating system and runtime environment.
/$ENV/ Environment variable
This token is replaced with the value of the environment variable '
$ENV
'. If that variable does not exist, the token is replaced with an empty string:tren.py -r =/$ORGANZATION/-/F/./E/ *
This prepends the organization's name to everything in the current directory.
/`cmd`/ Arbitrary command execution
This token is replaced with the string returned by executing the '
cmd
' command.For instance, you might want to prepend the name of the system to a all you shell scripts:
tren.py -r =/`uname -n`/-/F/./E/ *.sh
This construct is more generally a way to synthesize renaming tokens that are not built into tren. For instance, the built-in tokens only provide information about file and directory creation dates. You might want to use the date of last access. You do this by writing the appropriate script or program and then executing it within the /`cmd`/ construct. This effectively provides tren an unlimited number of renaming tokens.
Warning
Be very careful using this. It's possible to construct bizzarre, overly long, and just plain chowder-headed strings that make no sense in a renaming context using this construct.
Sometimes it's useful to rename files or directories based on some
property they possess like the date or time of creation, the size of
the file, who owns it, and so on. That's the idea behind the '/D/
',
'/L/
', and '/T/
' renaming tokens described in the previous section.
An extension of this idea is to order all the files being renamed based on one of these parameters. For instance, instead of actually embedding the date and time of creation in a file or directory name, you might want to order the files from oldest to newest with a naming convention like:
file-1.txt
file-2.txt
file-3.txt
This guarantees uniqueness in the final name and also sees to it that a sorted directory listing will show you the files or directories in the order you care about.
This is the purpose of sequence renaming tokens. They give you various ways to create sequences that can be embedded in the final file or directory name.
Sequence renaming tokens consist of three descriptive components and have the following general format:
/<ordering flag><type><counting pattern>/
where,
ordering flag:
+ ascending
- descending
type:
D sequence on file creation date & time
L sequence on file length
R sequence on the command line file order
T sequence on file creation time within a given day
The counting pattern is used to specify two things: The width of the sequence string, and the starting value for the sequence. Examples:
0001 -> 0001, 0002, 0003, ...
0000 -> 0000, 0001, 0002, ...
03 -> 03, 04, 05, ...
You do not have to use a '0
' to indicate the sequence width. You
can use any padding characters you like. tren only cares about
the width of the field and will "consume" your padding characters as
the count increases.:
xxx3 -> xxx3, xxx4, xxx5, ... 9999, xxx3, xxx4, ...
-+8 -> -+8, -+9, -10, -11, ... 999, -+8, -+9, ...
You are not restricted to numbers in a counting pattern. Letters may also be used. tren will preserve the case you specify in the token when creating sequences like this:
000a -> 000a, 000b, 000c, ... zzzz, 000a, ...
---Y -> ---Y, ---Z, --AA, ... ZZZZ, ---Y, ---Z, ...
Notice that when a sequence "rolls over", the next value is the initial sequence value you specified.
Sequence renaming tokens are thus a way to generate an ordering based on some property common to everything being renamed. Keep in mind that for purposes of sequencing, tren makes no distinction between a file and directory. It merely sequences based on the property you requested.
tren currently supports the following kinds of sequencing:
/+D0001/ Sequence based on the creation date/time
This produces a sequence from oldest to newest (or the reverse) of the renamed objects.
tren.py -b -r =/+D0002/ *.txt
This would rename all the files in the current directory into the form, '
0002.txt
', '0003.txt
', ... '9999.txt
' with '0002.txt
' being the oldest file and '9999.txt
' being the newest. If you used the token '/-D0002/
', you'd get the same thing, but in reverse order.
/+L0001/ Sequence based on the size of the files being renamed
This produces a sequence from shortest to longest (or the reverse) of the renamed objects.
tren.py -r /+L0002/ *.txt
This would rename all the files in the current directory into the form, '
0002.txt
', '0003.txt
', ... '9999.txt
' with '0002.txt
' being the shortest file and '9999.txt
' being the longest. If you used the token '/-L0002/
', you'd get the same thing, but in reverse order.
/+R0001/ Sequence based on the file order on the command line
This produces a sequence based on the order (or the reverse) of renaming - i.e., The order of the names on the command line.
tren.py -e -r =/+R0000/ MyFile.txt AFile.jpg me.log
This would rename all the files to, '
MyFile.0
', 'AFile.1
', and 'me.2
'. If you used '/-R0000/
', you'd get 'MyFile.2
', 'AFile.1
'`, and 'me.0
'.
/+T0001/ Sequence based on creation time within date
This produces a sequence based on the creation date and time similar to the '
/+D.../
' sequence renaming token above. However, the sequence resets at the beginning of each new date. This allows you to create unique sequences within a date like our example of renaming photo files from different cameras. (See: An Overview Of Renaming Tokens):tren.py -b -r =/D/-/+T0100/ *.txt
This would rename all the '
.txt
' files in the current directory into the form:200103010-0100.txt 200103010-0101.txt 200103010-0102.txt 200104010-0100.txt 200104010-0101.txt 200104010-0102.txt 200104011-0100.txt 200104011-0101.txt 200104011-0102.txt ...
In other words, instead of sequence just on the creation date, this allows us to sequence within the date. As always, the '
-
' flag will reverse this order within the date.Notice that you can get something similar using just file attribute renaming tokens:
tren.py -b -r =/D/-/T/ *.txt
This would produce names in the form:
200103010-03:01:23.txt 200103010-03:01:24.txt 200103010-03:01:25.txt ...
For most purposes, though, the order, rather than the absolute time is both more useful and more readable.
Here are some common examples of tren in action - the resulting file name(s) shown to the right as a comment. Study each example carefully. Small subtleties are introduced in various adjacent examples to illustrate different features of tren:
Get help:
tren.py -h
Print out detailed version information:
tren.py -v
Simple rename:
tren.py -r old=New fold.txt log.old # fNew.txt log.New
Change file "name":
tren.py -b -r old=New fold.txt log.old # fNew.txt log.old
Change file "extension":
tren.py -e -r old=New fold.txt log.old # fold.txt log.New
Rename all instances of a given string:
tren.py -g -r bin=Bin binary_bin.binbin # Binary_Bin.BinBin
Rename, ignoring case:
tren.py -c -r bin=BIN Binary_bIN.txt # BINary_bIN.txt
Rename multiple strings at once:
tren.py -r log:txt -r New:old New.log # old.txt
Rename using regular expressions:
tren.py -x -r a+=a Saaaaaaaally.doc # Sally.doc
Rename a file containing the '
=
' symbol:tren.py -r a\=b=c\=d a=b.txt # c=d.txt
Use renaming token:
tren.py -r =/I/ file.1 # 2010-01-12
Use renaming token to change file "name":
tren.py -b -r =/I/ file.1 file.2 # 2010-01-12.1 2010-01-12.2
Use renaming token to change file "extension":
tren.py -e -r =/D/ file.1 # file.20100112
You must be running Python 2.6.x or later. tren makes use of features not supported in releases prior to this.
As a general matter, tren should run on any POSIX-compliant OS
that has this version (or later) of Python on it. It will also run on
many Microsoft Windows systems. If the Windows system has the
'win32all
' Python extensions installed, tren will take advantage
of them for purposes of deriving the names of the user and group that
own the file or directory being renamed.
As of this writing, tren will not run in the cygwin environment because their version of Python is still backleveled to 2.5.x. When and if the cygwin team upgrades to 2.6.x, tren is expected to work there as well.
This program is EXPERIMENTAL (see the license). This means it's had some testing but is certainly not guaranteed to be perfect. As of this writing, it has been run on FreeBSD, Linux, Windows XP, and Mac OS X. It has not, however, been run on 64-bit versions of those OSs.
If you have experience, positive or negative, using tren on other OS/bitsize systems, please contact us at the email address below.
tren is Copyright (c) 2010 TundraWare Inc.
For terms of use, see the 'tren-license.txt
' file in the
program distribution. If you install tren on a FreeBSD
system using the 'ports' mechanism, you will also find this file in
'/usr/local/share/doc/tren
'.
Tim Daneliuk
tren@tundraware.com
$Id: tren.rst,v 1.139 2010/03/19 20:02:37 tundra Exp $
You can find the latest version of this program at:
http://www.tundraware.com/Software/tren