#!/usr/bin/env python
# tsshbatch.py - Non-Interactive ssh Connection
# Copyright (c) 2011 TundraWare Inc.
# Permission Hereby Granted For Unrestricted Personal Or Commercial Use
# See "tsshbatch-license.txt" For Licensing Details
#
# For Updates See: http://www.tundraware.com/Software/tsshbatch
# A tip of the hat for some of the ideas in the program goes to:
#
# http://jessenoller.com/2009/02/05/ssh-programming-with-paramiko-completely-different/
#####
# Program Housekeeping
#####
PROGNAME = "tsshbatch.py"
BASENAME = PROGNAME.split(".py")[0]
PROGENV = BASENAME.upper()
RCSID = "$Id: tsshbatch.py,v 1.135 2013/02/22 18:23:35 tundra Exp $"
VERSION = RCSID.split()[2]
CPRT = "(c)"
DATE = "2011"
OWNER = "TundraWare Inc."
RIGHTS = "All Rights Reserved."
COPYRIGHT = "Copyright %s %s, %s %s" % (CPRT, DATE, OWNER, RIGHTS)
PROGVER = PROGNAME + " " + VERSION + (" - %s" % COPYRIGHT)
HOMEPAGE = "http://www.tundraware.com/Software/%s\n" % BASENAME
#####
# Suppress Deprecation Warnings
# Required in some older environments where paramiko version
# is behind the python libs version.
#####
import warnings
warnings.filterwarnings("ignore", "", DeprecationWarning)
#####
# Imports
#####
import getopt
import getpass
import os
import paramiko
import shlex
import socket
import sys
#####
# Constants And Literals
#####
FAILURE = "FAILURE"
INDENTWIDTH = 8
OPTIONSLIST = "H:ehkn:p:v"
PADWIDTH = 30
SEPARATOR = " ---> "
SUCCESS = "SUCCESS"
SUDO = 'sudo'
SUDOPROMPT = 'READINGSUDOPW'
SUDOARGS = '-S -p %s' % SUDOPROMPT
TRAILER = ": "
USAGE = \
PROGVER + "\n" +\
HOMEPAGE + "\n\n" +\
"Usage: tsshbatch.py [-ehkv] [-n name] [-p pw] [-H 'host host ..' | serverlistfile] command arg arg arg \n" +\
" where,\n" +\
"\n" +\
" -H '...' List of targeted hosts passed as a single argument\n" +\
" -e Don't report remote host stderr output\n" +\
" -h Display help\n" +\
" -k Use key exchange-based authentication\n" +\
" -n name Specify login name\n" +\
" -p pw Specify login password\n" +\
" -v Display extended program version information\n"
#####
# Error Messages
#####
eBADARG = "Invalid command line: %s!"
eBADFILE = "Cannot open '%s'!"
eBADSUDO = "sudo Failed, Check Password Or Command! sudo Error Report: %s"
eFEWARGS = "Too few command line arguments!"
eNOCONNECT = "Cannot Connect! (%s)"
eNOLOGIN = "Cannot Login! (Login/Password Bad?)"
#####
# Prompts
#####
pPASS = "Password: "
pSUDO = "%s Password: " % SUDO
pUSER = "Username: "
#####
# Print Message(s) To stderr
#####
def PrintStderr(msg, TERMINATOR="\n"):
sys.stderr.write(msg + TERMINATOR)
# End of 'PrintStderr()'
#####
# Print Message(s) To stdout
#####
def PrintStdout(msg, TERMINATOR="\n"):
sys.stdout.write(msg + TERMINATOR)
# End of 'PrintStdout()'
#####
# Display An Error Message And Exit
#####
def ErrorExit(msg):
PrintStderr(msg)
sys.exit(1)
# End Of 'ErrorExit()'
#####
# Process A Command On A Host
#####
def HostCommand(host, user, pw, command):
ssh = paramiko.SSHClient()
# Connect and run the command, reporting results as we go
try:
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
if KEYEXCHANGE:
ssh.connect(host)
else:
ssh.connect(host, username=user, password=pw)
# If this is a sudo run, force password to be read
# from stdin thereby avoiding fiddling around with ptys.
if command.startswith(SUDO):
command = command.replace(SUDO, "%s %s" % (SUDO, SUDOARGS), 1)
# Run the command
stdin, stdout, stderr = ssh.exec_command(command)
# If doing a sudo command, send the password
if command.startswith(SUDO):
stdin.write("%s\n" % pw)
stdin.flush()
# If all we see on stderr at this point is our original
# prompt, then then the sudo promotion worked. A bad
# password or bad command will generate additional noise
# from sudo telling us to try again or that there was a
# command error.
sudonoise = stderr.readline().split(SUDOPROMPT)
if len(sudonoise) > 1: # sudo had problems
sudonoise = sudonoise[1].strip()
else: # sudo OK
sudonoise = ""
if sudonoise:
PrintReport([host, FAILURE, eBADSUDO % sudonoise], HANDLER=PrintStderr)
ssh.close()
return
PrintReport([host + " (stdout)", SUCCESS] + stdout.readlines())
if REPORTERR:
PrintReport([host + " (stderr)", ""] + stderr.readlines(), HANDLER=PrintStderr)
# Catch authentication problems explicitly
except paramiko.AuthenticationException:
PrintReport([host, FAILURE, eNOLOGIN], HANDLER=PrintStderr)
# Everything else is some kind of connection problem
except:
PrintReport([host, FAILURE, eNOCONNECT % sys.exc_info()[1]], HANDLER=PrintStderr)
ssh.close()
# End of 'HostCommand()'
#####
# Print Report
#####
# Expects input as [host, success/failure message, result1, result2, ...]
# Uses print handler to stdout by default but can be overriden at call
# time to invoke any arbitrary handler function.
def PrintReport(results, HANDLER=PrintStdout):
HANDLER(SEPARATOR + results[0] +
TRAILER +
(PADWIDTH - len(results[0])) * " " +
results[1])
for r in results[2:]: # Command Results
HANDLER(INDENTWIDTH * " " + r.strip())
# End of 'PrintReport()'
# ---------------------- Program Entry Point ---------------------- #
#####
# Process Any Options User Set In The Environment Or On Command Line
#####
# Options that can be overriden by user
HOSTS = "" # List of hosts to target
KEYEXCHANGE = False # Do key exchange-based auth?
PWORD = "" # Password
REPORTERR = True # Report stderr output from remote host
UNAME = "" # Login name
# Handle any options set in the environment
OPTIONS = sys.argv[1:]
envopt = os.getenv(PROGENV)
if envopt:
OPTIONS = shlex.split(envopt) + OPTIONS
# Combine them with those given on the command line
# This allows the command line to override defaults
# set in the environment
try:
opts, args = getopt.getopt(OPTIONS, OPTIONSLIST)
except getopt.GetoptError, (errmsg, badarg):
ErrorExit(eBADARG % errmsg)
# Unless the -H option is selected, this program
# requires a minimum of 2 command line arguments
# to run (hostlist file and command). If the user
# specifies -H, then all we need is the command.
MINARGS = 2
for opt, val in opts:
if opt == "-H":
HOSTS = val.split()
MINARGS = 1
if opt == "-e":
REPORTERR = False
if opt == "-h":
PrintStdout(USAGE)
sys.exit()
if opt == "-k":
KEYEXCHANGE = True
if opt == "-n":
UNAME = val
if opt == "-p":
PWORD = val
if opt == "-v":
PrintStdout(RCSID)
sys.exit()
# Make sure we have enough args to do the job
if len(args) < MINARGS:
ErrorExit(eFEWARGS)
#####
# Go Do The Requested Work
#####
# If we're not doing key exchange-based authentication, get
# user name & password.
# Only do this if they've not been set in the environment
# variable/command line
if not KEYEXCHANGE:
if not UNAME:
UNAME = raw_input(pUSER)
if not PWORD:
PWORD = getpass.getpass(pPASS)
# Host list and command parsing
# Get the list of hosts if not specified on command line.
# The assumption is that the first argument is the file
# containing the list of targeted hosts and the remaining
# arguments form the command.
if not HOSTS:
try:
f = open(args[0])
HOSTS = f.readlines()
f.close()
except:
ErrorExit(eBADFILE % sys.argv[1])
CMD = " ".join(args[1:])
# If hosts were passed on the command line, all the arguments
# are understood to form the command.
else:
CMD = " ".join(args[0:])
# If user want 'sudo' execution, they MUST provide a password because
# key exchange-based authentication is not part of sudo. If the
# password has not been set by some other means (command line or
# environment variable), ask for it here.
CMD = CMD.strip()
if CMD.startswith(SUDO) and not PWORD:
PWORD = getpass.getpass(pSUDO)
# Iterate over the list of hosts, executing the command
for host in HOSTS:
host = host.strip()
if host:
HostCommand(host, UNAME, PWORD, CMD)
tundra