# 'twander' configuration file example
# Unless you want to change key bindings, skip the first
# section. Uncomment either the Unix or Win32 examples
# as appropriate for your system.
#
# $Id: .twander,v 1.43 2003/01/07 21:34:38 tundra Exp $
#####
# Key Bindings
#####
# The default key bindings are shown in the comments below. To
# change a binding from its default value, conform to the following
# rules:
#
# 1) Only change the right side of the assignment. The left side
# is a variable name which is significant to twander and may
# not be changed.
#
# 2) Follow the Tkinter conventions for key naming. This should
# be pretty easy to do - just use the defaults below as a guide.
# Do *not* quote the key names. Just use the <...> naming
# convention as you see it below.
#
# 3) It is best if keyboard commands are all Control or Function keys.
# If you assign anything to a simple key it may conflict with a user-
# defined command. If you assign anything to a keypad/special
# key it may conflict with that key's normal GUI behavior.
#
# 4) The key binding variables (the left side of the assignments)
# are RESERVED and may not be used as names for your own user-
# defined variables elsewhere in the configuration file.
#
# 5) When you're done with your changes make sure to uncomment
# them so twander can read them it and override its defaults.
# Then either restart the program or reload the configuration
# file to assign the new bindings.
#
# 6) Note that you CANNOT change the bindings for Mouse Buttons.
# They are documented below for completeness sake, but any
# attempt to change them will cause \'twander\' to present
# a warning message and ignore that line.
#####
# Key Bindings Begin Here
#####
# General Program Commands
#
# MOUSECTX = <ButtonRelease-3> # Invoke context menu
# MOUSEDIR = <Shift-ButtonRelease-3> # Display the directory menu
# QUITPROG = <Control-q> # Quit the program
# READCONF = <Control-r> # Re-read the configuration file
# REFRESH = <Control-l> # Refresh screen
# TOGDETAIL = <Control-t> # Toggle detail view
#
# Directory Navigation
#
# CHANGEDIR = <Control-x> # Enter a new path
# DIRHOME = <Control-h> # Goto $HOME
# DIRBACK = <Control-b> # Goto previous directory
# DIRROOT = <Control-j> # Goto root directory
# DIRSTART = <Control-s> # Goto starting directory
# DIRUP = <Control-u> # Go up one directory level
# DRIVELIST = <Control-k> # On Win32, display Drive List View if possible
# MOUSEBACK = <Control-Double-ButtonRelease-1> # Go back one directory with mouse
# MOUSEUP = <Control-Double-ButtonRelease-3> # Go up one directory with mouse
#
# Selection Keys
#
# SELALL = <Control-comma> # Select all items
# SELINV = <Control-i> # Select all items
# SELNONE = <Control-period> # Unselect all items
# SELNEXT = <Control-n> # Select next item
# SELPREV = <Control-p> # Select previous item
# SELEND = <Control-e> # Select bottom item
# SELTOP = <Control-a> # Select top item
#
# Scrolling Commands
#
# PGDN = <Control-v> # Move page down
# PGUP = <Control-c> # Move page up
# PGRT = <Control-g> # Move page right
# PGLFT = <Control-f> # Move page left
#
# Execute A Command
#
# RUNCMD = <Control-z> # Run arbitrary user command
# SELKEY = <Return> # Select item w/keyboard
# MOUSESEL = <Double-ButtonRelease-1> # Select item w/mouse
# End of Key Bindings
#####
# Example 'twander' Configuration For Unix
#####
# User-defined variables make maintenance easier.
# Remember, that the variable name is case-sensitive.
# SHELL = bash -c
# VSHELL = [XTERM] [SHELL]
# XTERM = xterm -fn 9x15 -l -e
# Command definitions are in the general format:
#
# command-key command-name command-string
#
# command-keys are case sensitive. Any single
# character which can be typed from the keyboard can
# be used as a command key, *except* the '#' character
# (which is always seen as a comment delimiter) and
# = dd [VSHELL] 'dd if=[PROMPT:In File?] of=[PROMPT:Out File?] | [$PAGER]'
# V view [XTERM] [$PAGER] [DSELECTIONS]
# a any-command [VSHELL] '[PROMPT:Enter Command] [PROMPT:Enter Command Arguments] | [$PAGER]'
# d delete [XTERM] rm -i [DSELECTIONS]
# e edit [$EDITOR] [DSELECTIONS]
# l ls [VSHELL] '/bin/ls -al ./ | [$PAGER]'
# p print lpr [DSELECTIONS] &
# s showselected [XTERM] bash -c 'echo [DIR] "--->" [DSELECTION] "--->" [DSELECTIONS] "--->" [SELECTION] "--->" [SELECTIONS] | [$PAGER] '
# t xterm xterm -fn 10x20 -l -fb black -bg lightgreen
#----------------------------------------------------------------------#
#####
# Example 'twander' Configuration For Win32
#####
# EDT = [$EDITOR]
# a anycmd [PROMPT:Enter Command:]
# d del del /p [DSELECTIONS]
# e edit [EDT] [DSELECTIONS]
# V view [$PAGER] [DSELECTIONS]
# l ls dir [DIR] | [$PAGER]
tundra