diff --git a/.twander b/.twander
index 64163d0..72e9bed 100644
--- a/.twander
+++ b/.twander
@@ -1,5 +1,88 @@
 # 'twander' configuration file example
-# $Id: .twander,v 1.33 2002/12/12 17:51:52 tundra Exp $
+# Unless you want to change key bindings, skip the first
+# section.  Uncomment either the Unix or Win32 examples
+# as appropriate for your system.
+#
+# $Id: .twander,v 1.34 2002/12/15 22:49:03 tundra Exp $
+
+
+
+
+#####
+# Key Bindings
+#####
+
+# The default key bindings are shown in the comments below.  To
+# change a binding from its default value, conform to the following
+# rules:
+#
+#   1) Only change the right side of the assignment.  The left side
+#      is a variable name which is significant to twander and may
+#      not be changed.
+#
+#   2) Follow the Tkinter conventions for key naming.  This should
+#      be pretty easy to do - just use the defaults below as a guide.
+#      Do *not* quote the key names.  Just use the <...> naming
+#      convention as you see it below.
+#
+#   3) It is best if keyboard commands are all Control or Function keys.
+#      If you assign anything to a simple key it may conflict with a user-
+#      defined command.  If you assign anything to a keypad/special
+#      key it  may conflict with that key's normal GUI behavior.
+#
+#   4) The key binding variables (the left side of the assignments)
+#      are RESERVED and may not be used as names for your own user-
+#      defined variables elsewhere in the configuration file. 
+#
+#   5) When you're done with your changes make sure to uncomment
+#      them so twander can read them it and override its defaults.
+#      Then either restart the program or reload the configuration
+#      file to assign the new bindings.
+
+#####
+# Key Bindings Begin Here
+#####
+
+# General Program Commands
+#
+# QUITPROG  = <Control-q>                       # Quit the program
+# READCONF  = <Control-r>                       # Re-read the configuration file
+# REFRESH   = <Control-l>                       # Refresh screen
+# TOGDETAIL = <Control-t>                       # Toggle detail view
+# 
+# Directory Navigation
+# 
+# CHANGEDIR = <Control-x>                       # Enter a new path
+# DIRHOME   = <Control-h>                       # Goto $HOME
+# DIRBACK   = <Control-b>                       # Goto previous directory
+# DIRSTART  = <Control-s>                       # Goto starting directory
+# DIRUP     = <Control-u>                       # Go up one directory level
+# MOUSEBACK = <Control-Double-ButtonRelease-1>  # Go back one directory with mouse
+# MOUSEUP   = <Control-Double-ButtonRelease-3>  # Go up one directory with mouse
+# 
+# Selection Keys
+# 
+# SELALL    = <Control-comma>                   # Select all items
+# SELNONE   = <Control-period>                  # Unselect all items
+# SELNEXT   = <Control-n>                       # Select next item
+# SELPREV   = <Control-p>                       # Select previous item
+# SELEND    = <Control-e>                       # Select bottom item
+# SELTOP    = <Control-a>                       # Select top item
+# 
+# Scrolling Commands
+# 
+# PGDN      = <Control-v>                       # Move page down
+# PGUP      = <Control->                        # Move page up
+# 
+# Execute A Command
+# 
+# RUNCMD    = <Control-z>                       # Run arbitrary user command
+# SELKEY    = <Control-space>                   # Select item w/keyboard
+# SELMOUSE  = <Double-ButtonRelease-1>          # Select item w/mouse
+
+# End of Key Bindings
+
+
 
 #####
 # Example 'twander' Configuration For Unix
@@ -9,9 +92,9 @@
 # User-defined variables make maintenance easier.
 # Remember, that the variable name is case-sensitive.
 
-SHELL       = bash -c
-VSHELL      = [XTERM] [SHELL]
-XTERM       = xterm -fn 9x15 -l -e
+# SHELL       = bash -c
+# VSHELL      = [XTERM] [SHELL]
+# XTERM       = xterm -fn 9x15 -l -e
 
 # Command definitions are in the general format:
 #
@@ -20,18 +103,18 @@
 # command-keys are case sensitive.  Any single
 # character which can be typed from the keyboard can
 # be used as a command key, *except* the '#' character
-# which is always seen as a comment delimiter.
+# (which is always seen as a comment delimiter) and 
 
 
-D   dd           [VSHELL] 'dd if=[PROMPT:In File?] of=[PROMPT:Out File?] | [$PAGER]'
-V   view         [XTERM] [$PAGER] [DSELECTIONS] &
-a   any-command  [VSHELL] '[PROMPT:Enter Command] [PROMPT:Enter Command Arguments] | [$PAGER]'&
-d   delete       [XTERM] rm -i [DSELECTIONS] &
-e   edit         [$EDITOR] [DSELECTIONS] &
-l   ls           [VSHELL] '/bin/ls -al ./ | [$PAGER]' &
-p   print        lpr [DSELECTIONS] &
-s   showselected [XTERM] bash -c 'echo [DIR] "--->" [DSELECTION] "--->" [DSELECTIONS] "--->" [SELECTION] "--->" [SELECTIONS] | [$PAGER] ' &
-t   xterm        xterm -fn 10x20 -l -fb black -bg lightgreen &
+# =   dd           [VSHELL] 'dd if=[PROMPT:In File?] of=[PROMPT:Out File?] | [$PAGER]'
+# V   view         [XTERM] [$PAGER] [DSELECTIONS]
+# a   any-command  [VSHELL] '[PROMPT:Enter Command] [PROMPT:Enter Command Arguments] | [$PAGER]'
+#d   delete       [XTERM] rm -i [DSELECTIONS] 
+# e   edit         [$EDITOR] [DSELECTIONS] 
+# l   ls           [VSHELL] '/bin/ls -al ./ | [$PAGER]' 
+# p   print        lpr [DSELECTIONS] &
+#s   showselected [XTERM] bash -c 'echo [DIR] "--->" [DSELECTION] "--->" [DSELECTIONS] "--->" [SELECTION] "--->" [SELECTIONS] | [$PAGER] '
+# t   xterm        xterm -fn 10x20 -l -fb black -bg lightgreen 
 
 
 #----------------------------------------------------------------------#
@@ -45,8 +128,8 @@
 
 #a  anycmd [PROMPT:Enter Command:]
 #d  del   del /p    [DSELECTIONS]
-#e  edit  [EDT] [DSELECTIONS] &
-#V  view  [$PAGER] [DSELECTIONS] &
+#e  edit  [EDT] [DSELECTIONS] 
+#V  view  [$PAGER] [DSELECTIONS] 
 #l  ls    dir [DIR] | [$PAGER]