Notes On Baremetal Backup/Restore

A TundraWare Inc. Technical Note

Précis

Many commercial and open source solutions exist to solve the problem of creating backups that can be restored to "bare metal". That is, restoring a system image back to a disk when the machine will no longer boot or a disk has to be replaced. Image backups are preferred when rebuilding systems so you don't have to manually reinstall every application, system setting and so forth.

The purpose here was to do just that - create images capable of being "poured" onto, say, a blank, new hard drive, but using only standard linux command line tools.

General Approach

The idea is to make an image snapshot right after you build a machine, and anytime thereafter you make significant changes to its operating system and application configuration. You might do this, say, right before patching a server so that, if patching breaks the server to the point where it will no longer boot, you can just "pour" the previous image onto the disk.

To do this, we reboot our target machine using the Linux System Rescue CD. This CD has all the tools on it we need to do both image creation and restoration. You can find the iso image for this disk here:

http://sourceforge.net/projects/systemrescuecd/

You will also need access to a place to store and retrieve your images. In the examples below, we used a NAS NFS share, though you could also use another local hard drive, SAN connected storage or even a USB-connected drive.

Example Environment

In our examples below, we're imaging a CentOS 6.5 machine. The only thing we need to image is the operating system itself. In this example, we know there are 2 partitions of interest:

sda1 - The /boot partition - about 500MB

sda2 - The rest of the operating system, in this case contained

in LVM containers - about 52GB

The idea is that if the machine were to go dead, a disk failed, or what have you, this would be sufficient to get the replacement booting properly again. Presumably, you could then restore any data files you have from your standard backup/restore tools.

Backup Procedure

Boot from  the System Rescue CD

mount nas1:/shared /shared                     # Mount shared storage

sfdisk -d /dev/sda >/shared/ptbl               # Preserve the partition table

dd if=/dev/sda of=/shared/MBR bs=512 count=1   # Backup the Master Boot Record

dd if=/dev/sda1 of=/shared/boot.dd bs=12M      # Backup /boot

dd if=/dev/sda2 of=/shared/root.dd bs=12M      # Backup rootvg LVM (rest of OS)

reboot machine to make it operational again

How long this takes depends on what your write speed to the shared storage is and how big your partitions are. In this case sda1 is only about 500MB and completed rather quickly. But sda2 was about 52GB and took around 25 min to complete on a slow nfs mount - about 26MB/min in this case or about a quarter of the capacity of the 1Ge network connecting the NAS.

The bs=12 is environment-specific and you'll have to find a setting for this that makes best use of your network and NAS or other storage device.

Restore Procedure

Now, imagine that your OS is borked or the hard disk had to be replaced and you need to take the image from the backup above and getting running on the machine.

Boot from  the System Rescue CD

mount nas1:/shared /shared                     # Mount shared storage

dd if=/dev/zero of=/dev/sda bs=512 count=10    # Nuke any old boot/partion info on the disk

sfdisk /dev/sda </shared/ptbl                  # Restore the partition table

dd if=/shared/MBR of=/dev/sda bs=512 count=1   # Restore the Master Boot Record

dd if=/shared/boot.dd of=/dev/sda1 bs=12M      # Restore /boot

dd if=/shared/root.dd of=/dev/sda2 bs=12M      # Restore rootvg LVM (rest of OS)

Reboot machine to make it operational again

On the same network described above, restoring the 52MB rootvg took about 35 mins.

Because this is partition based - that is, you are imaging and restoring partitions, not disks - you can actually restore to a physical disk that is a different size than the one from which the image was taken. Obviously, there has to be enough room for all the data on the new disk. You can even restore to a smaller disk overall, so long as your full partitions will fit on it. This might be the case if, say, you original installation's partitions did not use all of the disk's space.

More commonly, thought, this makes it easy to lay your operating system down on a new, larger disk. Do an image of the old disk, restore it to the new disk, and then, while still running under the System Rescue CD, run parted or gparted to expand the partitions to use the additional disk space.

Observations

• Upside:

  1. You can use standard Linux commands to do imaged backups of your machine.
  2. You can use this to migrate an OS to a different-sized disk.

• Downside:

  1. You cannot do this while the machine is up and running so imaging this way requires a machine outage.
  2. Every block in the partition gets copied whether it is used or not.

• These tests were conducted on slow, consumer grade servers connected via 1Ge through an unmanaged switch. In an Enterprise class networking and NAS environment, we'd expect to see considerably faster backup and reimaging times, thereby minimizing server outage times.

• In theory this should also work on SAN-booted machines so long as the exact same LUN (WWID and size) is presented for the restore as was used for the backup. However, this was not tested and theory and Reality usually collide in rather nasty ways. Mr. Murphy is not our friend.

• Same story for VMs. Not tested. It's unclear whether a VM booted from a rescue disk would see the underlying disk storage (VMDK or whatever).

• Again, theoretically this should work with other operating system partitions and data partitions. But ... not tested.

• This works well for Unix-style operating systems because they boot with a full complement of drivers and discover what is on the machine at boot time.

• However, Windows may have a fit if you do this, especially if you restore to machine substantially different than the one where the backup image was created. First of all, Windows doesn't carry around any drivers it doesn't think it needs. Secondly, Windows licensing logic is designed to prevent this sort of thing as a deterrent to software piracy. This doesn't mean it cannot be done - it can - but it may take some extra fiddling after you reboot Windows.

• This approach assumes the disk us partitioned using standard fdisk type tools. Some OSs - notably the *BSD variants (aka "God's Own Operating System") - have the option to use their own disk slicing and labeling tools. This general approach will work, but you have to tweak it to ensure you preserve those boot loaders and custom slicing tables.

Copyright

This document is Copyright (c) 2014, TundraWare Inc., Des Plaines, IL 60018, All Rights Reserved.

License Terms

Permission is hereby granted for the free duplication and dissemination of this document if the following conditions are met:

• The document is distributed in whole and without modification, preserving the content in its entirety.
• No fee may be charged for such distribution beyond a usual and ordinary fee for duplication.
• You acknowledge that this document describes an EXPERIMENTAL PROCEDURE for learning purposes. It has not been tested in all possible hardware, software, operating system, and network configurations.
• By using this material in any way, you acknowledge you are doing so at your own risk. You agree to hold TundraWare Inc. harmless for any damage, direct or indirect, that this may or does cause to your computational environment, including, but not limited to, your or others' hardware, software, network, or data. You FURTHER AGREE TO HOLD TUNDRAWARE INC. HARMLESS FOR ANY ECONOMIC DAMAGE OR ANY OTHER ADVERSE CONSEQUENCE, DIRECT OR INDIRECT, CAUSED BY THE USE OF THIS MATERIAL.

Document Information

You can find the latest version of this document at:

http://www.tundraware.com/TechnicalNotes/Baremetal

A pdf version of this document can be downloaded at:

http://www.tundraware.com/TechnicalNotes/Baremetal/baremetal.pdf

This document produced with emacs, RestructuredText, and TeXLive.