NAME
----
**tren** - Advanced File Renaming
HOW TO USE THIS DOCUMENT
------------------------
**tren** is a powerful command line file/directory renaming tool. It
implements a variety of sophisticated renaming features than can be a bit
complex to learn. For this reason, this document is split into two
general sections: `REFERENCE`_ and `TUTORIAL AND DESCRIPTION`_. If
you are new to **tren**, start by studying the latter section first.
It will take you from very simple- to highly complex **tren** renaming
operations. Once you've got a sense of what
**tren** can do, the reference section will be handy to look up
options and their arguments.
.. WARNING:: **tren** is very powerful and can easily and
automatically rename things in ways you didn't intend.
It is ***strongly*** recommended that you try out new
**tren** operations with the ``-t`` option on the command
line. This turns on the "test mode" and will show you
what the program *would* do without actually doing it.
It goes without saying that you should be even more
careful when using this program as the system root or
administrator. It's quite easy to accidentally rename
system files and thereby clobber your OS. You have been
warned!!!
REFERENCE
---------
SYNOPSIS
--------
::
tren.py [-aCcdfhqtvXx] [-A alphabet] [-I file] [-i range] [-P esc] [-R sep] [-r old=new] [-S suffix] [-w width] file|dir ...
SPECIFYING OPTIONS
------------------
You may specify *tren* options in one of three ways:
1) On the command line
2) In an "include" file specified with ``-I filename`` on the command line
3) Via the ``$TREN`` environment variable
Options specified on the command line are evaluated from left to right
and supercede any options specified in the environment variable.
Think of any options set in ``$TREN`` as the "leftmost command line
options".
All options must precede the list of files and/or directories being
renamed. If one of your rename targets start with the ``-``
character, most command shells recognize the double dash as an
explicit "end of options" delimiter::
tren.py -opt -opt -opt -- -this_file_starts_with_a_dash
Most shells aren't too fussy about space between an option
that takes an argument, and that argument::
-i 1
-i1
Use whichever form you prefer. Just be aware that there are places
where spaces matter. For example, you can quote spaces on your
command line to create renaming requests that, say, replace spaces
with dashes..
Some options below are "global" - they change the state of the entire
program permanently and cannot be undone by subsequent options. Some
options are "toggles", they can be turned on- and off as you move from
left- to right on the command line. In this way, certain options
(like case sensitivity, regular expression handling, and so on) can be
set differently for each individual renaming request (``-r``). (If
you're very brave, you can select the ``-d`` option to do a debug
dump. Among many other things, the **tren** debugger dumps the state
of each renaming request, and what options are in effect for that
request.)
OPTIONS
=======
-A alphabet Install a user-defined "alphabet" to be used by
sequence renaming tokens.
(*Default*: Built-in alphabets only)
The alphabet is specified in the form::
name:characterset
Both the name and the characterset are case- and
whitespace-sensitive (if your shell permits passing
spaces on the command line). The "0th" element
of the alphabet is the leftmost character. The
counting base is the length of ``characterset``.
So, for instance, the following alphabet is
named ``Foo``, counts in base 5 in the
sequence, ``a, b, c, d, e, ba, bb, ...``::
-A Foo:abcde
-a Ask interactively before renaming each selected file or
directory.
(*Default*: off)
If you invoke this option, **tren** will prompt you before
renaming each file. The default (if you just hit ``Enter``)
is to *not* rename the file. Otherwise, you have the following
options::
n - Don't rename the current file
y - Rename the current file
! - Rename all the remaining files without further prompting
q - Quit the program
These options are all insensitive to case.
If you're doing forced renaming (``-f``), this option will
interactively ask you first about making any necessary backups
and then renaming the original target. *If you decline to
do the backup renaming, but accept the renaming of the original
target, the file or directory that already exists with that
name will be lost!*.
-b Turn off backups during forced renaming.
(*Default*: Do Backups)
Ordinarily, **tren** will refuse to do a renaming if the new
name for a file- or directory already exists. You can
override this with the ``-f`` (forced renaming) option. By
default, forced renaming makes a backup copy of the existing
file (by appending ``.backup`` to its name or some other
suffix you specify with the ``-S`` option) before doing the
renaming. This prevents existing files from being lost due to
a renaming. The ``-b`` option *inhibits backups* and allows
renaming over existing file- and directory names, thereby
losing the original file- or directory.
-C Do case sensitive renaming
(*Default*: This is the program default)
This option is provided so you can toggle the program back to
its default behavior after a previous ``-c`` on the command
line.
This option is observed both for literal and regular
expression-based renaming (``-x``). .
-c Collapse case when doing string substitution.
(*Default*: Search for string to replace is case sensitive)
When looking for a match on the old string to replace,
**tren** will ignore the case of the characters found
in the filename. For example::
tren.py -c -r Old=NEW Cold.txt fOlD.txt
This renames both files to ``CNEW.txt`` and ``fNEW.txt``
respectively. Notice that the new (replacement) string's case
is preserved.
This option is observed both for literal and regular
expression-based renaming (``-x``).
-d Dump debugging information
(*Default*: Off)
Dumps all manner of information about **tren** internals - of
interest only to program developers and maintainers. This
option provides internal program state *at the time it is
encountered on the command line*. For maximum debug output,
place this as the last (rightmost) option on the command line,
right before the list of files and directories to rename. You
can also place multiple ``-d`` options on the command line to
see how the internal tables of the program change as various
options are parsed.
-f Force renaming even if target file or directory name already
exists.
(*Default*: Skip renaming if a file or directory already
exists by the same name as the target.)
By default, **tren** will not rename something to a name that
is already in use by another file or directory. This option
forces the renaming to take place. However, the old file or
directory is not lost. It is merely renamed itself first, by
appending a suffix to the original file name. (*Default*:
.backup, but you can change it via the ``-S`` option.) This
way even forced renames don't clobber existing files or
directories.
-h Print help information.
-I file "Include" command line arguments from ``file``
It is possible to perform multiple renaming operations in one
step using more than one ``-r`` option on the **tren** command
line. However, this can make the command line very long and
hard to read. This is especially true if the renaming strings
are complex, contain regular expressions or Renaming
Tokens, or if you make heavy use of command line toggles.
The ``-I`` option allows you to place any command line
arguments in a separate *file* in place of- or in addition to
the **tren** command line and/or the ``$TREN`` environment
variable. This file is read one line at a time and the
contents appended to any existing command line. You can even
name the files you want renamed in the file, but they must
appear as the last lines of that file (because they must appear
last on the command line).
Whitespace is ignored as is anything from a ``#`` to the end of
a line::
# Example replacement string file
# Each line appended sequentially
# to the command line
-xr t[ext]+=txt # Appended first
-X
-r =/MYEAR/ -r foo=bar
my.file
your.file # Appended last
You may "nest" includes. That is, you can include file ``x``,
that includes file ``y``, that includes file ``z`` and so on.
However, its easy to introduce a "circular reference" when you
do this. Suppose file ``z`` tried to include file ``x`` in
this example? You'd be specifying an infinite inclusion loop.
To avoid this, **tren** limits the total number of inclusions
to 1000. If you exceed this, you'll get an error message and
the program will terminate.
Note that wildcard metacharacters like ``*`` and ``?`` that are
embedded in filenames included this way are expanded as they
would be from the command shell.
-i instances Specifies which "instances" of matching strings should
be replaced.
(*Default*: 0 or leftmost)
A file may have multiple instances of the ``old``
renaming string in it. The ``-i`` option lets you
specify which of these (one, several, all) you'd
like to have replaced.
Suppose you have a file called
``foo1-foo2-foo3.foo4``. The leftmost ``foo`` is
instance 0. The rightmost ``foo`` is instance 3.
You can also refer to instances relative to the
right. So the -1 instance is the last (rightmost),
-2, second from the last, and so forth.
Often, you just want to replace a specific instance::
-i :3 -r foo=boo
-i :-1 -r foo=boo
Both of these refer to the last instance of old string
``foo`` (found at ``foo4`` in our example name).
Sometimes, you'd like to replae a whole *range* of
instances. An "instance range" is specified using the
``:`` separator in the form::
-i first-to-replace:stop-here
Notice that the "stop-here" instance is NOT replaced.
In our string above, the option::
-i 1:-1 -r foo=boo
Would change the file name to::
foo1-boo2-boo3.foo4
You can also provide partial ranges::
-i 1: # From instance 1 to end of name
-i :-2 # All instances up to (not including) next-to-last
-i : # All instances
-P char Use ``char`` as the escape symbol.
(*Default*: ``\``)
-q Quiet mode, do not show progress.
(*Default*: Display progress)
Ordinarily, **tren** displays what it is doing as it processes
each file. If you prefer to not see this "noisy" output, use
the ``-q`` option. Note that this does not suppress warning
and error messages.
It doesn't make much sense to use this option in test mode
(``-t``), although you can. The whole point of test mode is
to see what would happen. Using the quiet mode suppresses that
output.
-R char Use ``char`` as the separator symbol in renaming
specifications.
(*Default*: ``=``)
-r <old=new> Replace ``old`` with ``new`` in file or directory
names.
Use this option to specify which strings you want to
replace in each file name. These strings are treated
literally unless you also invoke the ``-x`` option. In
that case, ``old`` is treated as a Python style
regular expression.
Both ``old`` and ``new`` may optionally contain
*renaming tokens* described later in this document.
If you need to use the ``=`` symbol *within* either
the old or new string, simply escape it: ``\=``
If it is convenient, you can change the separator
character to something other than ``=`` via the
``-R`` option. Similarly, you can change the
escape character via the ``-P`` option.
You can have multiple instances of this option on
your **tren** command line::
tren.py -r old=new -r txt:doc old-old.txt
This renames the file to::
new-old.doc
Remember that, by default, **tren** only replaces the first
(leftmost) instance of the old string with the new.
Each rename specification on the command line
"remembers" the current state of all the program
options and acts accordingly. For example::
tren.py -cr A=bb -Cr B=cc ...
The ``A=bb`` replacement would be done without
regard to case (both ``A`` and ``a`` would match),
where as the ``B=cc`` request would only replace
``B``.
-S suffix Suffix to append when making backup copies of existing
targets.
(*Default*: .backup)
If you choose to force renaming if files when the new
name already exists (``-f``), **tren** simply renames
the existing file or directory by appending a suffix to
it. By default, this suffix is ``.backup``, but you
can change it to any string you like with the ``-S```
option.
-t Test mode, don't rename, just show what the program *would* do.
**tren** is very powerful and capable of doing nasty things to
your file and directory names. For this reason, it is helpful
to test your **tren** commands before actually using them.
With this option enabled, **tren** will print out diagnostic
information about what your command *would* do, *without
actually doing it*.
If your renaming requests contain random renaming tokens,
test mode will only show you an approximation of the renaming
to take place (because new random name strings are generated
each time the program runs).
-v Print detailed program version information and keep running.
This is handy if you're capturing **tren** output into a log
and you want a record of what version of the program was used.
-w length Set the length of diagnostic and error output.
(*Default*: 80)
**tren** limits output to this length when dumping
debug information, errors, warnings, and general
information as it runs. This option is especially
useful when you're capturing **tren** output into
a log and don't want lines wrapped::
tren.py -w999 ..... 2>&1 > tren.log
**tren** makes sure you don't set this to some
unreasonably small value such that output formatting
would be impossible.
-X Treat the renaming strings literally
(*Default*: This is the program default)
This option is provided so you can toggle the program back to
its default behavior after a previous ``-x`` on the command
line.
-x Treat the old string in a ``-r`` replacement as a Python
style regular expression for matching purposes.
(*Default*: Treat the old string as literal text)
TUTORIAL AND DESCRIPTION
------------------------
.. WARNING:: ONE MORE TIME: **tren** is a powerful file and directory
renaming tool. Be **sure** you know what you're about to
do. If you're not, run the program in test mode (invoke
with the ``-t`` option) to see what would happen. You
have been warned!
The following sections are designed for the new- or occasional
**tren** user. They begin with the simplest of **tren** operations
and incrementally build more- and more complex examples, eventually
describing all of **tren**'s capabilities.
Overview
========
**tren** is a general purpose file and directory renaming tool. Unlike
commands like ``mv``, **tren** is particularly well suited for
renaming *batches* of files and/or directories with a single command
line invocation. **tren** eliminates the tedium of having to script
simpler tools to provide higher-level renaming capabilities.
**tren** is also adept at renaming only *part of an existing file
or directory name* either based on a literal string or a regular
expression pattern. You can replace any single, group, or all
instances of a given string in a file or directory name.
**tren** implements the idea of a "renaming token". These are special
names you can embed in your renaming requests that represent things
like the file's original name, its length, date of creation, and so
on. There are even renaming tokens that will substitute the content
of any environment variable or the results of running a program from a
shell back into the new file name.
**tren** can automatically generate *sequences* of file names based on
their dates, lengths, times within a given date, and so on. In fact,
sequences can be generated on the basis of any of the file's
``stat`` information. Sequence "numbers" can be ascending or
descending and the count can start at any initial value. Counting can
take place in one of several internally defined counting "alphabets"
(decimal, hex, octal, alpha, etc.) OR you can define your own counting
alphabet. This allows you to create sequences in any base (2 or
higher please :) using any symbol set for the count.
A Word About Program Defaults
=============================
**tren** has many options, but its defaults are designed to do
two things: a) Simplify the most common operations by making
them the default (no options required on the command line), and
2) Reduce the risk of accidentally modifying more of the file name
than you intented. So, by default:
**tren** treats renaming requests *literally*. That is, the "old
string" you specify for replacement is treated as literal text. It
requires a command line option (``-x``) to treat it as a regular
expression. *However*, any renaming tokens found in either the old-
or new strings of a renaming request *are* interpreted before the
renaming takes place.
**tren** renaming is *case sensitive*. If you want to ignore case,
use the ``-c`` option.
**tren** will only replace the *first (leftmost) instance* of "old
string" with "new string". If you want more- or different instances
replaced, use the ``-i`` option.
**tren** will not allow you to rename a file or directory *if one
with the new name already exists*. Such attempts will cause no
change to the file or directory being processed and an error message
will be displayed. This is intentional to force you to manually
rename or remove the file or directory that would have been
clobbered by a rename. You can override this default and *force* a
renaming via the ``-f`` option. This will cause the orginal file or
directory itself to be renamed with a ``.backup`` suffix. You can
change this suffix via the ``-S`` option.
Getting Help
============
There are three command line options that can give you some
measure of help and information about using **tren**:
-d Dumps debug information out to stderr. You can insert multiple
instances of this option on the command line to see how the
program has parsed everything *to the left* of it. This is
primarily intended as a debugging tool for people maintaining
**tren** but it does provide considerable information on the
internal state of the program that advanced users may find
useful.
-h Prints a summary of the program invocation syntax and all the
available options and then exits.
-v Prints the program version number and keeps running.
Controlling Program Output
==========================
As **tren** runs, it produces a variety of diagnostic and
status information. There are a number of options you can
use to control how this works:
-q Set's "quiet" mode and suppresses everthing except
error messages.
-w # Tells **tren** to wrap lines after ``#`` characters have been
printed. If you're capturing output to a log, set this to a
very high number like 999 to inhibit line wrapping.
Error and debug messages are sent to ``stderr``. Normal informational
messages are sent to ``stdout``. If you want to capture them both in
a log, try something like this (depending on your OS and/or shell)::
tren.py ..... 2>&1 >tren.log
Managing Complexity
===================
As you learn more of the program features, the **tren** command line
can get long, complex, and easy to goof up. It's also hard to
remember all the various options, how they work exactly, and which
specific one you need. For this reason, it is *highly* recommended
that - once you have a renaming request working the way you like - if
you plan to use it again, save it as an "include" file. That
way you can reuse it easily without having to keep track of the
details over and over. Instead of this::
tren.pu -c -i -1 -r .jpeg=.jpg file ...
Do this::
tren.py -I jpeg-to-jpg.tren file...
What's in the ``jpeg-to-jpg.tren`` file? Just this::
# tren Command Line
# Converts '.jpeg' (in any case mixture) file name suffix to '.jpg'
# Make the replacement case insensitive
-c # Reset this later on the command line with -C
# Only replace the rightmost instance
-i -1
# The actual replacement request
-r .jpeg=.jpg
Notice that you can stick comments in the file anywhere you like and
that they begin with ``#``. Notice also that the various options
can be entered on separate lines so it's simpler to read the include
file. If you find it useful, you can even include other include
files *in* an include file::
# Get the jpeg -> jpg suffix renaming
-I jpeg-to-jpg.tren
# Let's make it fancy
-i -1 -r .jpg=.fancy.jpg
If you do this, take care not to create a circular include. This can
happen when an include file tries to include itself, either directly,
or via another include file. **tren** limits the total number of
includes to a very large number. If it sees that the number has been
exceeded, it suspects a circular include and will issue an error
message to that effect and exit.
You can insert include options anywhere you like on the command line
and you can have as many as you like (up to a VERY large number you'll
never hit in practice). Each include reference will be replaced with
the contents of that file *at the position it appears on the command
line*.
If you find yourself using certain options most- or every time you use
the program, you can put them in the **$TREN** environment variable.
**tren** picks this up every time it starts. This minimizes errors
and reduces typing tedium. Just keep in mind that some options can be
overriden later on a command line, and some cannot. For instance,
suppose you do this::
export TREN=-f -c
The ``-c`` option to ignore case can be undone on the command line
with a ``-C`` option. However, the ``-f`` option cannot be undone.
So ... choose the options you want to make permanent in the
environment variable wisely.
Renaming Basics
===============
**tren** supports a variety of renaming mechanisms. The one thing
they have in common is that they're built with one or more *renaming
requests* that will be applied to one or more file- or directory
names. Renaming requests look like this on the **tren** command
line::
tren.py ... -r old=new ... -r old=new ... list of files/directories
No matter how complicated they look, the basic logic of the
renaming request stays the same: "When you find the string
``old`` in the file- or directory name, change it to the string
``new``.
The ``old`` and ``new`` renaming strings are built using a variety of
building blocks:
============================= =============================
*Old Strings Are Built With:* *New Strings Are Built With:*
----------------------------- -----------------------------
Literal Text Literal Text
Regular Expressions Renaming Tokens
Renaming Tokens
============================= =============================
You can use any of these building blocks alone or combine them
to create expressive and powerful renaming schemes.
Literal String Substitution
===========================
Literal String Substitution is just that - it replaces one literal
string with another to rename the target file or directory. This is
the most common, and simplest way to use **tren**. This is handy when
you have files and directories that have a common set of characters in
them you'd like to change. For instance::
tren.py -r .Jpeg=.jpg *.Jpeg
This would rename all files (or directories) whose names contained the
string ``.Jpeg`` and replace it with ``.jpg``. Well ... that's not
quite right. Unless you specify otherwise with the ``-i`` option,
*only the first (leftmost) instance of ``old`` is replaced with
``new``*. So, for example, if you started out with the file,
``My.Jpeg.Jpeg`` and ran the command above, you'd end up with a new
file name of ``My.jpg.Jpeg``
You can omit either ``old`` or ``new`` strings in a renaming
specification, but never both.
If you omit the ``old`` string, you're telling **tren** to *change the
whole file name*::
tren.py -r =MyNewFilename foo # New Name: MyNewFilename
Be careful with this one. If you apply it to a list of files or
directories, it's going to try and name them all to the *same* name.
By default, **tren** will refuse to overwrite an existing filename, so
it will stop you from doing this. If you absolutely insist on this
via the ``-f`` option, you'll get a bunch of files ending with
``.backup``. Say you have files ``a``, ``b``, and ``c``::
tren.py -fr =NewName a b c
When the command completes, the files will have been renamed
in this fashion::
a -> NewName.backup.backup
b -> NewName.backup
c -> NewName
If you omit the ``new`` string, you're telling **tren** to *remove*
the leftmost instance of ``old`` string (or other instances via the
``-i`` option described below) from the file- or directory name. For
example::
tren.py -rfoo= foo1-foo2-foo3.foo4 # New name: 1-foo2-foo3.foo4
If you try to omit *both* ``old`` and ``new`` strings, you're
effectively telling **tren** to change the existing file name to
... nothing (a null string). This is impossible because file names
must be at least one character long. **tren** enforces both this
minimum length AND the maximum legal length of new file names. It
will print an error and exit if your renaming attempt would violate
either of these limits. (As of this writing, the maximum file- or
directory name length allowed by the operating systems on which
**tren** runs is 255 characters.)
Substitution Instances
======================
As we just saw above, sometimes the ``old`` string appears in several
places in a file- or directory name. By default, **tren** only
replaces the first, or leftmost "instance" of an ``old`` string.
However, using the ``-i`` option you can specify *any* instance you'd
like to replace. In fact, you can even specify a *range* of instances
to replace.
Instances are nothing more than *numbers* that tell **tren** just
where in the name you'd like the replacement to take place. Positive
numbers means we're counting instances from the *left* end of the
name. The leftmost instance is 0 (not 1!!!).
You can also count *backwards* from the right end of the string using
negative numbers. -1 means the last instance, -2 means next-to-last,
and so on. In summary, counting from the left starts at zero and
counting from the right starts at -1.
Suppose you have a file called::
foo1-foo2-foo3.foo4
The leftmost ``foo1`` is instance 0 of old string ``foo``. It is also
instance -4. The rightmost ``foo4`` is instance 3 of old string
``foo``, and also instance -1.
You can specify a *single instance* to replace::
tren.py -i 1 -r f=b foo1-foo2-foo3.foo4 # New name: foo1-boo2-foo3.foo4
tren.py -i -1 -r f=b foo1-foo2-foo3.foo4 # New Name: foo1-foo2-foo3.boo4
You can also specify a *range of instances* to replace using the
notation::
-i first-to-replace:stop-here
All instances from the "first-to-replace" up to, *but NOT including*
"the stop-here" are replaced::
tren.py -i 1:3 -r f=b foo1-foo2-foo3.foo4 # New Name: foo1-boo2-boo3.foo4
tren.py -i -4:-2 -r f=b foo1-foo2-foo3.foo4 # New Name: boo1-boo2-foo3.foo4
``-i :`` means "replace *all* instances::
tren.py -i : -r f=b foo1-foo2-foo3.foo4 # New Name: boo1-boo2-boo3.boo4
You can also use *partial range specifications*::
tren.py -i 1: -r f=b foo1-foo2-foo3.foo4 # New Name: foo1-boo2-boo3.boo4
tren.py -i :-2 -r f=b foo1-foo2-foo3.foo4 # New Name: boo1-boo2-foo3.foo4
Note that you cannot specify individual, non-adjacent instances.
There is no way to use a single **tren** command to replace, say, the
only the 2nd and the 4th instance of an ``old`` string. Doing that
requires two renaming requests. The good news is that we can do them
both on a single **tren** invocation.
Multiple Substitutions
======================
You can put as many renaming requests on a **tren** command line as
you like (.... well, up to the length limit imposed by your operating
system and shell, anyway). As we just saw, this can be handy when
a single renaming request can't quite do everything we want.
BUT ... there's a catch. In designing your renaming requests,
you have to keep in mind that **tren** processes the command
line *from left to right*, incrementally constructing the new name
as it goes. For instance::
tren.py -r foo=bar -r foo=baz foo1-foo2-foo3.foo4
Produces ... wait a second ... why on earth are there two renaming
requests with idential ``old`` strings on the same command line?
Shouldn't this produce a final name of ``baz1-foo2-foo3.foo4``?
Nope. After the leftmost renaming request has been processed,
the new name is ``bar1-foo2-foo3.foo4``. Remember that, by
default, **tren** only replaces the *leftmost* or 0th instance
of an ``old`` string. So, when the second renaming request is
processed, the instance 0 of ``foo`` is now found in the
string ``foo2``. So, the final name will be, ``bar1-baz2-foo3.foo4``.
The lesson to learn from this is that multiple renaming requests
on the command line will work fine, but you have to do one of
two things (or both):
1) Make sure you're tracking what the "intermediate" names
will look like as the new file name is being constructed,
renaming request, by renaming request.
2) Make sure the renaming requests operate on completely
disjoint parts of the file name.
.. NOTE:: Similarly, **tren** remembers the last state of each option
as you move from left to right on the command line. For instance::
tren.py -i1 -r f=F -r o=O foo1-foo2-foo3.foo4
You might be tempted to believe that this would produce,
``fOo1-Foo2-foo3.foo4``, but it doesn't. It produces,
``foO1-Foo2-foo3.foo4`` instead because the ``-i 1`` appears
prior to *both* renaming requests and thus applies to each
of them. If you want the first instance of "o" to be
replaced, you need a command line like this::
tren.py -i1 -r f=F -i0 -r o=O foo1-foo2-foo3.foo4
This sort of thing is generally true for *all* options, so
be sure they're set the way you want them to the left of a
renaming request.
As a practical matter, this can get really complicated to track. If
in doubt, it's always better to run two separate **tren** commands in,
say, a shell script to make the renaming explicit, rather than to
obscure things with clever command line trickery.
So, let's go back to our example from the previous section. We
want to replace the 2nd and 4th instances of the string "foo"
in our file name. We do this with two renaming requests on the
same command line, considering what each one does to the name
as it is encountered::
tren.py -i1 -r foo=bar -i2 -r foo=bar foo1-foo2-foo3.foo4
More About Command Line Pitfalls
================================
As we just saw, you can get surprising results as **tren** works its
way through the command line from left to right. There are other
potential pitfalls here, so it's helpful to understand just *how*
**tren** processes your command line, step-by-step:
1) Prepend the contents of $TREN to the user-provided command line.
This allows you to configure your own default set of options so
you don't have to type them in every time.
2) Resolve all references to include files.
This has to be done before anything that follows, because
include files add options to the command line.
3) Build a table of every file name to be renamed.
We'll need this information if any of the renaming requests use
the file- or sequence renaming tokens (discussed later in this
document).
4) Build a table containg each renaming request storing the current
state of every program option at that point on the command line.
This allows **tren** to apply options differently to different
renaming requests on the same command line. This came in handy
in our example of the previous section.
5) Resolve any renaming tokens found in either the ``old`` or
``new`` portions of the renaming request.
At this point, both ``old`` and ``new`` are nothing more than
simple strings, although ``old`` may be interpreted as a
regular expression rather than literally if the option to do so
is in effect.
6) Process each file found on the command line in left to right
order, applying each renaming request, in the order it appeared
from left to right on the command line.
Simple eh? Well, mostly it is ... until it isn't. As we just saw,
incrementally building up a new name with multiple renaming requests
can produce unexpected results and we have to plan for them.
Similarly, you can inadvertently accidentally give a file the *wrong
name entirely* ... this is usually a Bad Thing.
Say you have two files, ``x`` and ``y``. You want to rename ``x`` to
``y`` and ``y`` to ``z1``. Well, order matters here. Say you do
this::
tren.py -fr x=y -r y=z1 x y
Let's see what happens in order:
1) File ``x`` renaming::
x -> y
y -> z1
So, file ``x`` is renamed ``z1`` (!)
2) File ``y`` renaming::
y -> z1 .... oops, x1 exists, we need a backup
z1 -> z1.backup
y -> z1
Um ... not quite what we wanted. However, if we shuffle around the
order of renaming arguments AND the order in which to process the
files, we can get what we want::
tren.py -r y=z1 -r x=y y x
Notice that we can drop the ``-f`` option because there is no longer a
naming conflict (see the next section for more about forced renaming).
.. NOTE:: Always remember" **The Rightmost Renaming Request "Wins"!**
The point here, as we've said already, is that you have to be very
careful when constructing command lines, keeping track of options, and
*what order* you specify both renaming requests *and* the files- and
directories to be renamed. As always, the simple way around this is
to run multiple, separate **tren** commands, each with its own single
renaming request.
Forcing Renaming
================
By default, **tren** will not allow you to perform a renaming operation
if the new name already exists. For example, say you have three files,
``a``, ``aa``, and ``b``, and you try this::
tren.py -r a=b a aa b
**tren** will skip the renaming of file ``a`` because a file named
``b`` already exists. It will, however, continue to run and rename
``aa``, to ``ba``.
This is designed to prevent you from accidentally clobbering files
that already exist. You can, however, override this default behavior
and *force* the renaming to take place in such situations, using the
``-f`` option. Even then, the existing file isn't lost, it is simply
*renamed itself* by appending the suffix ``.backup`` to its original
name. That way, if you made a mistake, you haven't lost the original
file. So, in our example above, the command becomes::
tren.py -fr a=b a aa b
When it's done, we end up with these files::
b # The original 'a' file
b.backup # The original 'b' file
ba # The original 'aa' file
If you don't like the suffix, ``.backup``, you can change it to any
string (of length 1 or greater) via the ``-S`` option::
tren.py -S .bku -fr a=b a aa b
Now the backed up file will be named ``b.bku``.
**tren** will even backup files that are themselves backups. This can
be handy if your renaming request ends up mapping more than one file- or
directory name to the same new name::
tren.py -fr =newname a b c
This produces files named::
newname # The original 'c' file
newname.backup # The original 'b' file
newname.backup.backup # The original 'a' file
You can inhibit this behavior and prevent backups with the ``-b``
option. This effectively *erases the original file- or directory of
that name*. This is **very dangerous** and should rarely be used.
It's better to do the backups and delete them later when you're sure
you do not need them. The underlying operating system rules for
renaming will still apply in this case. For instance, most OSs will
not allow you rename a file over the name of an existing directory and
vice versa.
.. NOTE:: The Unix ``mv`` command will allow you to move a file
*into* a directory::
mv file dir
However, this is an ``mv`` "move" semantic, and is not
properly a renaming operation. The underlying file system
will not permit a file to be renamed over a directory or
vice versa. **tren** reflects this OS semantic ... it's not
intended to be a reimplementation of ``mv``.
Ignoring Case
=============
"Literal" string substitution means just that - **tren** must find an
exact instance of ``old`` in the file name being renamed and replace
it with ``new``. So, the default is to do *case sensitive* matching.
There are times, however, when you want to ignore case when doing this
matching. For example, suppose you have file names with a variety of
suffixes in various case combinations like ``.jpeg``, ``.Jpeg``, and
``.JPEG``. Suppose you'd like these to all be changed to ``.jpg``.
Rather than having to do three separate renaming operations it's handy
to just ignore case *when matching the old string for replacement*.
That's what the ``-c`` option is for::
tren.py -i -1 -c -r.jpeg=.jpg *.jpeg *.Jpeg *.JPEG
Notice that the case insensitivity only applies to the *matching* of
the ``old`` string. Once **tren** has determined such a match exists,
the ``new`` string is used *literally* with case intact.
You can turn case sensitivity on- and off for various renaming
requests on the same command line. ``-C`` turns case sensitivity on,
and - as we just saw - ``-c`` turns it off::
tren.py -cr X=y -Cr A=b ...
The ``X=y`` renaming request will be done in a case insensitive
manner, whereas the ``A=b`` will be done only on literal instances of
upper case ``A`` in the target file names.
The Strange Case Of Mac OS X And Windows
========================================
Mac OS X and Windows have an "interesting" property that makes case
handling a bit tricky. Both of these operating systems *preserve*
case in file and directory names, but they do not *observe* it. (It
is possible to change this behavior in OS X when you first prepare a
drive, and make the filesystem case sensitive. This is rarely done in
practice, however.)
These OSs show upper- and lower- case in file names as you request,
but they do not *distinguish* names on the basis of case. For
instance, the files ``Foo``, ``foo``, and ``FOO``, are all the
same name in these operating systems, and only one of these can exist
in a given directory. This can cause **tren** to do the unexpected
when your renaming command is doing nothing more than changing case.
Suppose you start with a file called ``Aa.txt`` and run this
command::
tren.py -rA=a Aa.txt
**tren** will immediately complain and tell you that the file
``aa.txt`` already exists and it is skipping the renaming. Why?
Because from the point-of-view of OS X or Windows, ``aa.txt`` (your
new file name) is the same as ``Aa.txt`` (your original file name).
You can attempt to force the renaming::
tren.py -frA=a Aa.txt
Guess what happens? Since **tren** thinks the new file name already
exists, it backs it up to ``aa.txt.backup``. But now, when it goes
to rename the original file ... the file is *gone* (thanks to the
backup renaming operation)! **tren** declares an error and
terminates.
This is not a limitation of **tren** but a consequence of a silly
design decision in these two operating systems. As a practical
matter, the way to avoid this issue is to never do a renaming
operation in OS X or Windows *that only converts case*. Try
to include some other change to the filename to keep the
distinction between "old name" and "new name" clear to the
OS. In the worst case, you'll have to resort to something like::
tren.py -rA=X Aa.txt
tren.py -rX=a Xa.txt
Using Regular Expressions
=========================
Ordinarily **tren** treats both the old string you specify with the
``-r`` option *literally*. However, it is sometimes handy to be able
to write a regular expression to specify what you want replaced. If
you specify the ``-x`` option, **tren** will treat your old string as
a regular expresion, compile it (or try to anyway!) and use it to
select which strings to replace. This makes it much easier to rename
files that have repeated characters or patterns, and groups of files
that have similar, but not idential strings in their names you'd like
to replace.
Say you have a set of files that are similar, but not identical in
name, and you want to rename them all::
sbbs-1.txt
sbbbs-2.txt
sbbbbbbbbs-3.txt
Suppose you want to rename them, replacing two or more instances of
``b`` with ``X``. It is tedious to have to write a separate literal
``-r old=new`` string substitution for each instance above. This is
where regular expressions can come in handy. When you invoke the
``-x`` option, **tren** understands this to mean that the ``old``
portion of the replacement option is to be treated as a *Python style
regular expression*. That way, a single string can be used to match
many cases::
tren.py -x -r bb+=X *.txt
This renames the files to::
sXs-1.txt
sXs-2.txt
sXs-3.txt
Keep in mind that a literal string is a subset of a regular
expression. This effectively means that with ``-x`` processing
enabled you can include *both* regular expressions and literal text in
your "old string" specification. The only requirement is that the
string taken as a whole must be a valid Python regular expression. If
it is not, **tren** will display an error message to that effect.
For more detail on the Python regular expression syntax, see:
http://docs.python.org/library/re.html
Because Python regular expressions can make use of the ``=`` symbol,
you need a way to distinguish between an ``=`` used in a regular
exression and the same symbol used to separate the old and new
operands for the ``-r`` option. Where this symbol needs to appear in
a regular expression, it has to be escaped like this: ``\=``.
As with literal string renaming, regular expression renaming requests
honor both the case sensitivity options (``-C`` and ``-c``) as well
as the instance option, ``-i``. So, for example::
tren.py -x -ci -1 -r Bb+=X sbbsbbbsbbbbsbbbbbs
You'll rename the file to ``sbbsbbbsbbbbsXs``
Changing The Renaming Separator & Escape Characters
===================================================
There may be times when the default renaming separator (``=``)
and/or escape character (``\``) make it clumsy to construct a
renaming request. This can happen if, say, either the old- or new
string in a literal renaming needs to use the ``=`` symbol many
times. Another case where this may be helpful is when constructing
complex regular expressions than need to make use of these characters.
The ``-R`` and ``-P`` options can be used to change the character
used for renaming separator and escape character respectively. You
can use any character you like (these must be a single character
each), but bear in mind that the underlying operating system
understands certain characters as being special. Trying to use them
here will undoubtedly deeply confuse your command shell, and possibly
your file system. For example, the ``/`` character is used as a
path separator in Unix-derived systems. It's therefore a Really Bad
Idea to try and use it as a renaming separator or escape character.
Interactive Renaming
====================
By default, **tren** attempts to perform all the renaming requests on
all the file- and directory names given on the command line
automatically. It is sometimes helpful to work *interactively*
wherein you're asked what to do for each proposed renaming.
Interactive renaming is requested via the ``-a``, "ask" option::
tren.py -a -rfoo=Bar foo1.txt foo2.txt foo3.txt
**tren** will compute each file's proposed new name and ask you
what you want to do. You have 4 possible choices::
N, n, or Enter - No, don't rename this file
Y, y - Yes, rename the file
! - Yes, rename this and all remaining files without asking any more
Q, q - Quit the program
There is one slight subtlety here to watch for when doing forced
renaming. As we've seen, if you select the ``-f`` option and the new
file name already exists, **tren** will backup the existing file name
before doing the renaming. In interactive mode, you will be asked
whether or not to proceed with the renaming both for the file in
question *and for any consequenent backups*. If you decline to do the
backup but accept the primary renaming, this will have the same effect
as the ``-b`` option: The existing file- or directory will be
overwritten by the renaming operation.
If the ``-b`` option is selected in interactive mode, then you'll only
be prompted for the primary file renamings (because ``-b`` suppresses
the creation of backups).
An Overview Of Renaming Tokens
==============================
**tren** implements the notion of *renaming tokens*. These can
appear in either the ``old`` or ``new`` string components of a ``-r``
renaming argument.
It is sometimes useful to be able to take a group of files or
directories whose names have nothing in common and impose a common
naming scheme on them. Another use for renaming tokens is to do the
renaming based on some property the file or directory possesses like
its creation date, size, owner's name, and so on.
Renaming tokens are nothing more than special symbols that represent
"canned" information **tren** knows about the file- or directory
being renamed, information from the OS itself, and information used to
sequence or order the files being renamed.
For instance, if you insert the ``/MYEAR/`` token into a old- or new
string definition, **tren** will replace it with *the year the file or
directory being renamed was last modified* and use that string in the
renaming process::
tren.py -ryear=/MYEAR/ My-year.txt # New name: My-2010.txt
A really handy way to use renaming tokens is to name your files in a
particular *order*. For example, suppose you and your friends pool
your vacation photos but each of your cameras uses a slightly
different naming scheme. You might want to just reorder them by the
date and time each picture was taken, for example. That way you end
up with one coherent set of named and numbered files. You might start
with something like this::
DSC002.jpg # Bob's camera, taken 1-5-2010 at noon
dc0234.Jpg # Mary's camera, taken 1-5-2010 at 8am
032344.jpeg # Sid's camera, taken 1-3-2010 at 4pm
It would be nice to get these in order somehow. We can, by combining
*file* renaming tokens (that know thing about the file being renamed)
and *sequence* renaming tokens (that know how to order all the files
being renamed by some key like date, length, who owns it, and so on)::
tren.py -r =/MYEAR//MMON//MDAY/-MyVacation-/+MDATE::0001/.jpeg *.jp*
Every place you see something in the form ``/.../``, think, "That is a
renaming token whose value will be filled in by **tren**." This
syntax is the same whether you're using a *file*-, *system*-, or
*sequence* renaming token.
This would rename all the files in the current directory ending with
``.jp*``. The ``/MYEAR/...`` would be replaced with the *date* the picture
was taken. The ``/+MDATE::0001/`` refers to a *starting sequence number* to
uniquely identify files modified on the same date. The other strings,
``-MyVacation-`` and ``.jpeg``, are inserted *literally* in the final
file names. After we ran this command, the files above would end up
with these names::
20100103-MyVacation-0001.jpeg # Sid's
20100105-MyVacation-0001.jpeg # Mary's
20100105-MyVacation-0002.jpeg # Bob's
Notice that the files taken on the same date have been sequenced by
the time-of-day they were taken because we included the
``/+MDATE.../`` sequence renaming token in our pattern. The ``+``
here means to construct the sequence in *ascending* order. A ``-``
would specify *descending* order.
.. Note:: Notice that there is *no old string* in our example above.
That is, there is nothing to the left of the ``=`` symbol in
the ``-r`` option. This effectively means "replace
everything" in the existing file or directory name.
Of course, you don't *have* to replace the entire filename when
using tokens. It's perfectly legitimate to replace only
a portion of the existing name::
tren.py -r file=/MYEAR/MMON//MDAY/-file file-1 file.2
This would rename our files to: ``20100101-file-1`` and
``20100101-file.2`` Notice that we combined literal text and a renaming
token to do this.
You can even use renaming tokens in your *old string* specification.
For instance, suppose you manage a number of different systems and you
set their system name in an environment variable called ``SYSNAME`` and
this same name is used to identify backup files. You might then do
something like this::
tren.py -xr '/$SYSNAME/.*.bku=/FNAME/.old' *
If your system name was "matrix", then the command above would only
rename files whose names began with ``matrix`` and ended with ``.bku``.
If your system name were "morton", then the command above would only
rename files whose names began with ``morton`` and ended with ``.bku``.
Notice that we combined a reference to an environment variable within
a regular expression. This was done to do the match on "names
beginning with... and ending with ...". Also notice that the renaming
token ``/FNAME/`` is just the *original name of the file*.
In order for this to work, we had to single quote the renaming
request. This is because Unix shells will themselves try to replace
``$SYSNAME`` which is not what we want. If we don't single quote
(thereby turning off shell variable interpolation) and run this, say,
on a machine called "matrix", the command will be handed to **tren**
looking like this::
tren.py -xr /matrix/.*.bku=/FNAME/.old' *
**tren** will then promptly error out and tell you that it doesn't
know about a renaming token called ``/matrix/``.
There are a several things to keep in mind when doing things like
this:
1) The ``/$SYSNAME/`` in the ``old`` string is used to *find the
text to rename*, whereas the same renaming token in the ``new``
string means *insert the contents of that environment variable
here*.
2) Renaming tokens are always evaluated *before* any regular
expression processing takes place. It's up to you to make sure
that when the two are combined (as we have in the example above),
*that the final result is still a valid Python regular
expression*. This may involve explicit quoting of the renaming
tokens used in the ``old`` string specification.
**tren** has many other kinds of renaming tokens. Their structure and
use is described in some detail in the section below entitled
`Renaming Tokens: The Gory Details`_.
Renaming Token Pitfalls
=======================
As we saw in earlier sections, **tren** command line option and file
name interaction can be tricky. It can depend on order and on whether
the various renaming request "collide" with each other as a new file
name is computed. A similar potential collision exists between
renaming tokens and renaming requests. Recall from `More About
Command Line Pitfalls`_ that renaming tokens are resolved *before* a
renaming request is processed. This means that the string
substitution (literal or regular expression) of the renaming operation
can *conflict with the characters returned when the renaming token was
resolved*. For example, suppose we do this::
tren.py -r =New-/FNAME/ -r My=Your MyFile.txt
The first renaming request computes the name ``New-MyFile.txt``.
However, the second renaming request further modifies this to
``New-YourFile.txt``. In effect, the second renaming request is
*overwriting part of the string produced by the renaming token
reference*. This is an intentional feature of **tren** to allow
maximum renaming flexibility. However, you need to understand how it
works so you don't get unexpected and strange results. For example,
look what happens when you reverse the order of the renaming requests
in this case::
tren.py -r My=Your -r =New-/FNAME/ MyFile.txt
``My`` gets replaces with ``Your``, but as soon as the second renaming
request is processed, the whole string is thrown away and replaced
with the final name ``New-MyFile.txt``. This is yet another
example of, **"The Rightmost Renaming Request Wins!"**
Renaming Tokens: The Gory Details
=================================
As we've just seen, a *renaming token* is nothing more than
a string representing something **tren** knows about. These
fit in one of three categories:
- An attribute of the file or directory being renamed
- An attribute of the underling operating system environment
- A sequence that reflects some ordering principle
Renaming tokens are delimited by the ``/`` character. **tren**
replaces these tokens with the corresponding information (see
descriptions below) wherever you indicated in either the ``old`` or
``new`` strings of a ``-r`` rename command.
Currently, **tren** defines a number of renaming tokens. Future
releases of **tren** may add more of these, so it's good to
periodically reread this material.
How **tren** Uses File Metadata
================================
Files and directories have so-called "metadata" associated with them
like who owns them, how long they are, what date they were modified,
and so on. (This information is commonly described in a data structure
called ``stat``. Even non-Unix systems like Windows have some version
of this data structure.)
The file attribute- and sequence renaming tokens are built on this
metadata, so it's worth taking a moment to understand just *how*
it is used. **tren** keeps track of the following information
for every file- or directory you've named on the command line:
- The order the file appears on *the command line*
- The order the file appears *alphabetically*
- The *original name* of the file before any renaming took place
- The date/time it was last *accessed*
- The date/time it was last *modified*
- The date/time it's directory entry (inode) was last *modified*
- The *inode number* for the file
- The *device number* where the directory entry (inode) lives
- The *numeric group ID* the file belongs to
- The *name of the group* the file belongs to
- The *numeric user ID* of the file owner
- The *name of the user* that owns the file
- The *mode or permissions* for the file
- The *number of links* to the file
- The *size* of the file
**tren** uses this information to resolve file attribute renaming
tokens, compute the value of a particular sequence renaming token and
so on. For example, a sequence renaming token based on group *name*
will order the sequence *alphabetically by group name* whereas one
based on *group ID* will order it numerically.
It is likely that you'll only be interested in a small subset of
these. For completness, though, **tren** keeps track of all the
metadata available about the files- or directories named on the
command line and makes it available in the form of renaming tokens.
Most commonly, you'll find yourself using the command line,
alphabetic, original name, length, and various time/date renaming
tokens. Since there are actually three different kinds of date stamps
maintained in modern filesystems, it's worth knowing the difference
between them. A good tutorial can be found here:
http://chandynasty.blogspot.com/2007/01/difference-between-unix-mtime-ctime.html
.. NOTE:: **tren** is portable across many operating systems because
it is written in the Python programming language. Python
*mostly* works the exact same way everywhere. However,
Windows presents some problems because it does not quite
work the same way as Unix-derived OSs do. In particular, if
you need to make use of the User/Group Name renaming tokens
on Windows, consider installing the ``win32all`` extensions
to your Windows Python installation. If you don't, **tren**
will base its order on the generic names ``WindowsUser`` and
``WindowsGroup``. (In any case, User/Group *ID* numbers are
not meaningful under Windows and default to 0. Renaming
tokens based on these IDs should thus be avoided on Windows
systems since every file- and directory will have the same
ID.)
File Attribute Renaming Tokens
==============================
These tokens are derived from information about the file or
directory being renamed.
``/D/ File or directory creation date``
This token is replaced with the date of creation
of the file or directory being renamed. It is
in ``yyyymmdd`` format.
``/dd/ File or directory day of creation``
This token is replaced with the the day of the month the
file was created in ``dd`` format.
``/dy/ File or directory day of creation``
This token is replaced with the the name of the day the
file was created in ``Ddd`` format.
``/E/ Original File Extension``
This token is replaced the "extension" portion of the file
or directory before renaming. This does not include the
extension separator string.
``/F/ Original File Name``
This token is replaced the "name" portion of the file or
directory before renaming.
.. NOTE:: Notice that there is no token for the *whole* filename
because you can always synthesize it with ``/F/./E/``
``/G/ File or directory primary group name``
This token is replaced with the name of the
primary group to which the file belongs.
``/hh/ File or directory hour of creation``
This token is replaced with the hour the file was
created in ``hh`` format.
``/I/ File or directory creation date in ISO format``
This token is replaced with the date of creation of the
file or directory being renamed. It is similar to ``/D/``
except it is in ISO format, ``YYYY-MM-DD``.
``/L/ File or directory length``
This token is replaced with a numeric string
that indicates the length of the file or directory
in bytes.
``/mm/ File or directory minutes of creation``
This token is replaced with the minutes the file was
created in ``mm`` format.
``/mo/ File or directory month of creation``
This token is replaced with the numeric month the file was
created in ``mm`` format.
``/my/ File or directory month of creation``
This token is replaced with the abbreviated name of the
month the file was created in ``Mmm`` format.
``/ss/ File or directory seconds of creation``
This token is replaced with the seconds the file was
created in ``ss`` format.
``/T/ File or directory creation time``
This token is replaced with the time of creation of the
file or directory being renamed. It is in ``hh:mm:ss``
format. This is equivalent to ``/hh/:/mm/:/ss/``.
``/U/ File or directory owner name``
This token is replaced with the name of the
file or directory's owner.
``/yyyy/ File or directory year of creation``
This token is replaced with the year the file was
created in ``yyyy`` format.
System Related renaming tokens
==============================
These tokens are derived from the underlying operating system
and runtime environment.
``/$ENV/ Environment variable``
This token is replaced with the value of
the environment variable ``$ENV``. If
that variable does not exist, the token
is replaced with an empty string::
tren.py -r =/$ORGANZATION/-/F/./E/ *
This prepends the organization's name to everything in
the current directory.
``/`cmd`/ Arbitrary command execution``
This token is replaced with the string
returned by executing the ``cmd`` command.
For instance, you might want to prepend the name
of the system to a all you shell scripts::
tren.py -r =/`uname -n`/-/F/./E/ *.sh
This construct is more generally a way to synthesize
renaming tokens that are not built into **tren**. For
instance, the built-in tokens only provide information
about file and directory *creation* dates. You might
want to use the date of *last access*. You do this by
writing the appropriate script or program and then
executing it within the /\`cmd\`/ construct. This
effectively provides **tren** an unlimited number of
renaming tokens.
.. WARNING:: Be *very* careful using this. It's possible to
construct bizzarre, overly long, and just plain
chowder-headed strings that make no sense in a renaming
context using this construct.
Sequence Renaming Tokens
========================
Sometimes it's useful to rename files or directories based on some
*property they possess* like the date or time of creation, the size of
the file, who owns it, and so on. That's the idea behind the ``/D/``,
``/L/``, and ``/T/`` renaming tokens described in the previous section.
An extension of this idea is to *order all the files being renamed*
based on one of these parameters. For instance, instead of actually
embedding the date and time of creation in a file or directory name,
you might want to order the files from oldest to newest with a naming
convention like::
file-1.txt
file-2.txt
file-3.txt
This guarantees uniqueness in the final name and also sees to it that
a sorted directory listing will show you the files or directories in
the order you care about.
This is the purpose of *sequence renaming tokens*. They give you
various ways to create sequences that can be embedded in the final
file or directory name.
General Format Of Sequence Renaming Tokens
==========================================
Sequence renaming tokens consist of three descriptive components and
have the following general format::
/<ordering flag><type><counting pattern>/
where,
ordering flag:
+ ascending
- descending
type:
D sequence on file creation date & time
L sequence on file length
R sequence on the command line file order
T sequence on file creation time within a given day
Count Pattern Format
====================
The counting pattern is used to specify two things: The width of the
sequence string, and the starting value for the sequence. Examples::
0001 -> 0001, 0002, 0003, ...
0000 -> 0000, 0001, 0002, ...
03 -> 03, 04, 05, ...
You do not have to use a ``0`` to indicate the sequence width. You
can use *any* padding characters you like. **tren** only cares about
the width of the field and will "consume" your padding characters as
the count increases.::
xxx3 -> xxx3, xxx4, xxx5, ... 9999, xxx3, xxx4, ...
-+8 -> -+8, -+9, -10, -11, ... 999, -+8, -+9, ...
You are not restricted to numbers in a counting pattern. Letters may
also be used. **tren** will preserve the case you specify in the
token when creating sequences like this::
000a -> 000a, 000b, 000c, ... zzzz, 000a, ...
---Y -> ---Y, ---Z, --AA, ... ZZZZ, ---Y, ---Z, ...
Notice that when a sequence "rolls over", the next value is the
*initial sequence value you specified*.
Types Of Sequence Renaming Tokens
=================================
Sequence renaming tokens are thus a way to generate an ordering *based
on some property common to everything being renamed*. Keep in mind
that for purposes of sequencing, **tren** *makes no distinction
between a file and directory*. It merely sequences based on the
property you requested.
**tren** currently supports the following kinds of sequencing:
``/+D0001/ Sequence based on the creation date/time``
This produces a sequence from oldest to newest
(or the reverse) of the renamed objects.
``tren.py -b -r =/+D0002/ *.txt``
This would rename all the files in the current
directory into the form, ``0002.txt``, ``0003.txt``,
... ``9999.txt`` with ``0002.txt`` being the oldest
file and ``9999.txt`` being the newest. If you
used the token ``/-D0002/``, you'd get the same
thing, but in reverse order.
``/+L0001/ Sequence based on the size of the files being renamed``
This produces a sequence from shortest to longest
(or the reverse) of the renamed objects.
``tren.py -r =/+L0002/ *.txt``
This would rename all the files in the current
directory into the form, ``0002.txt``, ``0003.txt``,
... ``9999.txt`` with ``0002.txt`` being the shortest
file and ``9999.txt`` being the longest. If you
used the token ``/-L0002/``, you'd get the same
thing, but in reverse order.
``/+R0001/ Sequence based on the file order on the command line``
This produces a sequence based on the order (or the
reverse) of renaming - i.e., The order of the names
on the command line.
``tren.py -e -r =/+R0000/ MyFile.txt AFile.jpg me.log``
This would rename all the files to, ``MyFile.0``,
``AFile.1``, and ``me.2``. If you used ``/-R0000/``,
you'd get ``MyFile.2``, ``AFile.1```, and ``me.0``.
``/+T0001/ Sequence based on creation time within date``
This produces a sequence based on the creation date
and time similar to the ``/+D.../`` sequence renaming
token above. However, the sequence *resets* at the
beginning of each new date. This allows you to
create unique sequences *within a date* like our
example of renaming photo files from different
cameras. (See: `An Overview Of Renaming Tokens`_)::
tren.py -b -r =/D/-/+T0100/ *.txt
This would rename all the ``.txt`` files in the current
directory into the form::
200103010-0100.txt
200103010-0101.txt
200103010-0102.txt
200104010-0100.txt
200104010-0101.txt
200104010-0102.txt
200104011-0100.txt
200104011-0101.txt
200104011-0102.txt
...
In other words, instead of sequence just on the creation date,
this allows us to sequence *within* the date. As always, the
``-`` flag will reverse this order within the date.
Notice that you can get something similar using just
file attribute renaming tokens::
tren.py -b -r =/D/-/T/ *.txt
This would produce names in the form::
200103010-03:01:23.txt
200103010-03:01:24.txt
200103010-03:01:25.txt
...
For most purposes, though, the order, rather than the
absolute time is both more useful and more readable.
BUGS, MISFEATURES, OTHER
------------------------
You must be running Python 2.6.x or later. **tren** makes use of
features not supported in releases prior to this.
As a general matter, **tren** should run on any POSIX-compliant OS
that has this version (or later) of Python on it. It will also run on
many Microsoft Windows systems. If the Windows system has the
``win32all`` Python extensions installed, **tren** will take advantage
of them for purposes of deriving the names of the user and group that
own the file or directory being renamed.
As of this writing, **tren** will not run in the **cygwin** environment
because their version of Python is still backleveled to 2.5.x. When
and if the **cygwin** team upgrades to 2.6.x, **tren** is expected to
work there as well.
This program is **EXPERIMENTAL** (see the license). This means it's
had some testing but is certainly not guaranteed to be perfect. As of
this writing, it has been run on FreeBSD, Linux, Windows XP, and Mac
OS X. It has not, however, been run on 64-bit versions of those OSs.
If you have experience, positive or negative, using **tren** on other
OS/bitsize systems, please contact us at the email address below.
HOW COME THERE'S NO GUI?
------------------------
**tren** is primarily intented for use by power users, sys admins, and
advanced users that (mostly) find GUIs more of a nuisance than a help.
There are times, however when it would be handy to be able to select
the files to be renamed graphically. TundraWare has a freely
available file browser that is macro programmed. It will work nicely
in such applications:
http://www.tundraware.com/Software/twander/
COPYRIGHT AND LICENSING
-----------------------
**tren** is Copyright (c) 2010 TundraWare Inc.
For terms of use, see the ``tren-license.txt`` file in the
program distribution. If you install **tren** on a FreeBSD
system using the 'ports' mechanism, you will also find this file in
``/usr/local/share/doc/tren``.
AUTHOR
------
::
Tim Daneliuk
tren@tundraware.com
DOCUMENT REVISION INFORMATION
-----------------------------
::
$Id: tren.rst,v 1.161 2010/03/29 18:58:55 tundra Exp $
You can find the latest version of this program at:
http://www.tundraware.com/Software/tren
This document was produced using reStructuredText:
http://docutils.sourceforge.net/rst.html
tundra