.. contents::
NAME
----
**tren** - Advanced File Renaming
HOW TO USE THIS DOCUMENT
------------------------
**tren** is a powerful command line file/directory renaming tool. It
implements a variety of sophisticated renaming features than can be a bit
complex to learn. For this reason, this document is split into two
general sections: `REFERENCE`_ and `TUTORIAL AND DESCRIPTION`_. If
you are new to **tren**, start by studying the latter section first.
It will take you from very simple- to highly complex **tren** renaming
operations. Once you've got a sense of what
**tren** can do, the reference section will be handy to look up
options and their arguments.
.. DANGER:: **tren** is very powerful and can easily and
automatically rename things in ways you didn't intend.
It is ***strongly*** recommended that you try out new
**tren** operations with the ``-t`` option on the command
line. This turns on the "test mode" and will show you
what the program *would* do without actually doing it.
It goes without saying that you should be even more
careful when using this program as the system root or
administrator. It's quite easy to accidentally rename
system files and thereby clobber your OS. You have been
warned!!!
REFERENCE
---------
SYNOPSIS
--------
::
tren.py [-aCcdfhqtvXx] [-A alphabet] [-I file] [-i range] [-P esc] [-R sep] [-r old=new] [-S suffix] [-w width] file|dir ...
SPECIFYING OPTIONS
------------------
You may specify *tren* options in one of three ways:
1) On the command line
2) In an "include" file specified with ``-I filename`` on the command line
3) Via the ``$TREN`` environment variable
Options specified on the command line are evaluated from left to right
and supercede any options specified in the environment variable.
Think of any options set in ``$TREN`` as the "leftmost command line
options".
All options must precede the list of files and/or directories being
renamed. If one of your rename targets start with the ``-``
character, most command shells recognize the double dash as an
explicit "end of options" delimiter::
tren.py -opt -opt -opt -- -this_file_starts_with_a_dash
Most shells aren't too fussy about space between an option
that takes an argument, and that argument::
-i 1
-i1
Use whichever form you prefer. Just be aware that there are places
where spaces matter. For example, you can quote spaces on your
command line to create renaming requests that, say, replace spaces
with dashes..
Some options below are "global" - they change the state of the entire
program permanently and cannot be undone by subsequent options. Some
options are "toggles", they can be turned on- and off as you move from
left- to right on the command line. In this way, certain options
(like case sensitivity, regular expression handling, and so on) can be
set differently for each individual renaming request (``-r``). (If
you're very brave, you can select the ``-d`` option to do a debug
dump. Among many other things, the **tren** debugger dumps the state
of each renaming request, and what options are in effect for that
request.)
OPTIONS
=======
-A alphabet Install a user-defined "alphabet" to be used by
sequence renaming tokens.
(*Default*: Built-in alphabets only)
The alphabet is specified in the form::
name:characterset
Both the name and the characterset are case- and
whitespace-sensitive (if your shell permits passing
spaces on the command line). The "0th" element
of the alphabet is the leftmost character. The
counting base is the length of ``characterset``.
So, for instance, the following alphabet is
named ``Foo``, counts in base 5 in the
sequence, ``a, b, c, d, e, ba, bb, ...``::
-A Foo:abcde
-a Ask interactively before renaming each selected file or
directory.
(*Default*: off)
If you invoke this option, **tren** will prompt you before
renaming each file. The default (if you just hit ``Enter``)
is to *not* rename the file. Otherwise, you have the following
options::
n - Don't rename the current file
y - Rename the current file
! - Rename all the remaining files without further prompting
q - Quit the program
These options are all insensitive to case.
If you're doing forced renaming (``-f``), this option will
interactively ask you first about making any necessary backups
and then renaming the original target. *If you decline to
do the backup renaming, but accept the renaming of the original
target, the file or directory that already exists with that
name will be lost!*.
-b Turn off backups during forced renaming.
(*Default*: Do Backups)
Ordinarily, **tren** will refuse to do a renaming if the new
name for a file- or directory already exists. You can
override this with the ``-f`` (forced renaming) option. By
default, forced renaming makes a backup copy of the existing
file (by appending ``.backup`` to its name or some other
suffix you specify with the ``-S`` option) before doing the
renaming. This prevents existing files from being lost due to
a renaming. The ``-b`` option *inhibits backups* and allows
renaming over existing file- and directory names, thereby
losing the original file- or directory.
-C Do case sensitive renaming
(*Default*: This is the program default)
This option is provided so you can toggle the program back to
its default behavior after a previous ``-c`` on the command
line.
This option is observed both for literal and regular
expression-based renaming (``-x``). .
-c Collapse case when doing string substitution.
(*Default*: Search for string to replace is case sensitive)
When looking for a match on the old string to replace,
**tren** will ignore the case of the characters found
in the filename. For example::
tren.py -c -r Old=NEW Cold.txt fOlD.txt
This renames both files to ``CNEW.txt`` and ``fNEW.txt``
respectively. Notice that the new (replacement) string's case
is preserved.
This option is observed both for literal and regular
expression-based renaming (``-x``).
-d Dump debugging information
(*Default*: Off)
Dumps all manner of information about **tren** internals - of
interest only to program developers and maintainers. This
option provides internal program state *at the time it is
encountered on the command line*. For maximum debug output,
place this as the last (rightmost) option on the command line,
right before the list of files and directories to rename. You
can also place multiple ``-d`` options on the command line to
see how the internal tables of the program change as various
options are parsed.
-f Force renaming even if target file or directory name already
exists.
(*Default*: Skip renaming if a file or directory already
exists by the same name as the target.)
By default, **tren** will not rename something to a name that
is already in use by another file or directory. This option
forces the renaming to take place. However, the old file or
directory is not lost. It is merely renamed itself first, by
appending a suffix to the original file name. (*Default*:
.backup, but you can change it via the ``-S`` option.) This
way even forced renames don't clobber existing files or
directories.
-h Print help information.
-I file "Include" command line arguments from ``file``
It is possible to perform multiple renaming operations in one
step using more than one ``-r`` option on the **tren** command
line. However, this can make the command line very long and
hard to read. This is especially true if the renaming strings
are complex, contain regular expressions or Renaming
Tokens, or if you make heavy use of command line toggles.
The ``-I`` option allows you to place any command line
arguments in a separate *file* in place of- or in addition to
the **tren** command line and/or the ``$TREN`` environment
variable. This file is read one line at a time and the
contents appended to any existing command line. You can even
name the files you want renamed in the file, but they must
appear as the last lines of that file (because they must appear
last on the command line).
Whitespace is ignored as is anything from a ``#`` to the end of
a line::
# Example replacement string file
# Each line appended sequentially
# to the command line
-xr t[ext]+=txt # Appended first
-X
-r =/MYEAR/ -r foo=bar
my.file
your.file # Appended last
You may "nest" includes. That is, you can include file ``x``,
that includes file ``y``, that includes file ``z`` and so on.
However, its easy to introduce a "circular reference" when you
do this. Suppose file ``z`` tried to include file ``x`` in
this example? You'd be specifying an infinite inclusion loop.
To avoid this, **tren** limits the total number of inclusions
to 1000. If you exceed this, you'll get an error message and
the program will terminate.
Note that wildcard metacharacters like ``*`` and ``?`` that are
embedded in filenames included this way are expanded as they
would be from the command shell.
-i instances Specifies which "instances" of matching strings should
be replaced.
(*Default*: 0 or leftmost)
A file may have multiple instances of the ``old``
renaming string in it. The ``-i`` option lets you
specify which of these (one, several, all) you'd
like to have replaced.
Suppose you have a file called
``foo1-foo2-foo3.foo4``. The leftmost ``foo`` is
instance 0. The rightmost ``foo`` is instance 3.
You can also refer to instances relative to the
right. So the -1 instance is the last (rightmost),
-2, second from the last, and so forth.
Often, you just want to replace a specific instance::
-i :3 -r foo=boo
-i :-1 -r foo=boo
Both of these refer to the last instance of old string
``foo`` (found at ``foo4`` in our example name).
Sometimes, you'd like to replace a whole *range* of
instances. An "instance range" is specified using the
``:`` separator in the form::
-i first-to-replace:stop-here
Notice that the "stop-here" instance is NOT replaced.
In our string above, the option::
-i 1:-1 -r foo=boo
Would change the file name to::
foo1-boo2-boo3.foo4
You can also provide partial ranges::
-i 1: # From instance 1 to end of name
-i :-2 # All instances up to (not including) next-to-last
-i : # All instances
-P char Use ``char`` as the escape symbol.
(*Default*: ``\``)
-q Quiet mode, do not show progress.
(*Default*: Display progress)
Ordinarily, **tren** displays what it is doing as it processes
each file. If you prefer to not see this "noisy" output, use
the ``-q`` option. Note that this does not suppress warning
and error messages.
It doesn't make much sense to use this option in test mode
(``-t``), although you can. The whole point of test mode is
to see what would happen. Using the quiet mode suppresses that
output.
-R char Use ``char`` as the separator symbol in renaming
specifications.
(*Default*: ``=``)
-r <old=new> Replace ``old`` with ``new`` in file or directory
names.
Use this option to specify which strings you want to
replace in each file name. These strings are treated
literally unless you also invoke the ``-x`` option. In
that case, ``old`` is treated as a Python style
regular expression.
Both ``old`` and ``new`` may optionally contain
*renaming tokens* described later in this document.
If you need to use the ``=`` symbol *within* either
the old or new string, simply escape it: ``\=``
If it is convenient, you can change the separator
character to something other than ``=`` via the
``-R`` option. Similarly, you can change the
escape character via the ``-P`` option.
You can have multiple instances of this option on
your **tren** command line::
tren.py -r old=new -r txt:doc old-old.txt
This renames the file to::
new-old.doc
Remember that, by default, **tren** only replaces the first
(leftmost) instance of the old string with the new.
Each rename specification on the command line
"remembers" the current state of all the program
options and acts accordingly. For example::
tren.py -cr A=bb -Cr B=cc ...
The ``A=bb`` replacement would be done without
regard to case (both ``A`` and ``a`` would match),
where as the ``B=cc`` request would only replace
``B``.
-S suffix Suffix to append when making backup copies of existing
targets.
(*Default*: .backup)
If you choose to force file renaming when the new
name already exists (``-f``), **tren** simply renames
the existing file or directory by appending a suffix to
it. By default, this suffix is ``.backup``, but you
can change it to any string you like with the ``-S```
option.
-t Test mode, don't rename, just show what the program *would* do.
**tren** is very powerful and capable of doing nasty things to
your file and directory names. For this reason, it is helpful
to test your **tren** commands before actually using them.
With this option enabled, **tren** will print out diagnostic
information about what your command *would* do, *without
actually doing it*.
If your renaming requests contain random renaming tokens,
test mode will only show you an approximation of the renaming
to take place (because new random name strings are generated
each time the program runs).
-v Print detailed program version information and keep running.
This is handy if you're capturing **tren** output into a log
and you want a record of what version of the program was used.
-w length Set the length of diagnostic and error output.
(*Default*: 80)
**tren** limits output to this length when dumping
debug information, errors, warnings, and general
information as it runs. This option is especially
useful when you're capturing **tren** output into
a log and don't want lines wrapped::
tren.py -w999 ..... 2>&1 > tren.log
**tren** makes sure you don't set this to some
unreasonably small value such that output formatting
would be impossible.
-X Treat the renaming strings literally
(*Default*: This is the program default)
This option is provided so you can toggle the program back to
its default behavior after a previous ``-x`` on the command
line.
-x Treat the old string in a ``-r`` replacement as a Python
style regular expression for matching purposes.
(*Default*: Treat the old string as literal text)
TUTORIAL AND DESCRIPTION
------------------------
.. DANGER:: ONE MORE TIME: **tren** is a powerful file and directory
renaming tool. Be **sure** you know what you're about to
do. If you're not, run the program in test mode (invoke
with the ``-t`` option) to see what would happen. You
have been warned!
The following sections are designed for the new- or occasional
**tren** user. They begin with the simplest of **tren** operations
and incrementally build more and more complex examples, eventually
describing all of **tren**'s capabilities.
Overview
========
**tren** is a general purpose file and directory renaming tool. Unlike
commands like ``mv``, **tren** is particularly well suited for
renaming *batches* of files and/or directories with a single command
line invocation. **tren** eliminates the tedium of having to script
simpler tools to provide higher-level renaming capabilities.
**tren** is also adept at renaming only *part of an existing file
or directory name* either based on a literal string or a regular
expression pattern. You can replace any single, group, or all
instances of a given string in a file or directory name.
**tren** implements the idea of a "renaming token". These are special
names you can embed in your renaming requests that represent things
like the file's original name, its length, date of creation, and so
on. There are even renaming tokens that will substitute the content
of any environment variable or the results of running a program from a
shell back into the new file name.
**tren** can automatically generate *sequences* of file names based on
their dates, lengths, times within a given date, and so on. In fact,
sequences can be generated on the basis of any of the file's
``stat`` information. Sequence "numbers" can be ascending or
descending and the count can start at any initial value. Counting can
take place in one of several internally defined counting "alphabets"
(decimal, hex, octal, alpha, etc.) OR you can define your own counting
alphabet. This allows you to create sequences in any base (2 or
higher please :) using any symbol set for the count.
A Word About Program Defaults
=============================
**tren** has many options, but its defaults are designed to do
two things: a) Simplify the most common operations by making
them the default (no options required on the command line), and
2) Reduce the risk of accidentally modifying more of the file name
than you intented. So, by default:
**tren** treats renaming requests *literally*. That is, the "old
string" you specify for replacement is treated as literal text. It
requires a command line option (``-x``) to treat it as a regular
expression. *However*, any renaming tokens found in either the old-
or new strings of a renaming request *are* interpreted before the
renaming takes place.
**tren** renaming is *case sensitive*. If you want to ignore case,
use the ``-c`` option.
**tren** will only replace the *first (leftmost) instance* of "old
string" with "new string". If you want more- or different instances
replaced, use the ``-i`` option.
**tren** will not allow you to rename a file or directory *if one
with the new name already exists*. Such attempts will cause no
change to the file or directory being processed and an error message
will be displayed. This is intentional to force you to manually
rename or remove the file or directory that would have been
clobbered by a rename. You can override this default and *force* a
renaming via the ``-f`` option. This will cause the orginal file or
directory itself to be renamed with a ``.backup`` suffix. You can
change this suffix via the ``-S`` option.
Getting Help
============
There are three command line options that can give you some
measure of help and information about using **tren**:
-d Dumps debug information out to stderr. You can insert multiple
instances of this option on the command line to see how the
program has parsed everything *to the left* of it. This is
primarily intended as a debugging tool for people maintaining
**tren** but it does provide considerable information on the
internal state of the program that advanced users may find
useful.
-h Prints a summary of the program invocation syntax and all the
available options and then exits.
-v Prints the program version number and keeps running.
Controlling Program Output
==========================
As **tren** runs, it produces a variety of diagnostic and
status information. There are a number of options you can
use to control how this works:
-q Set's "quiet" mode and suppresses everthing except
error messages.
-w # Tells **tren** to wrap lines after ``#`` characters have been
printed. If you're capturing output to a log, set this to a
very high number like 999 to inhibit line wrapping.
Error and debug messages are sent to ``stderr``. Normal informational
messages are sent to ``stdout``. If you want to capture them both in
a log, try something like this (depending on your OS and/or shell)::
tren.py ..... 2>&1 >tren.log
Managing Complexity
===================
As you learn more of the program features, the **tren** command line
can get long, complex, and easy to goof up. It's also hard to
remember all the various options, how they work exactly, and which
specific one you need. For this reason, it is *highly* recommended
that - once you have a renaming request working the way you like - if
you plan to use it again, save it as an "include" file. That
way you can reuse it easily without having to keep track of the
details over and over. Instead of this::
tren.pu -c -i -1 -r .jpeg=.jpg file ...
Do this::
tren.py -I jpeg-to-jpg.tren file...
What's in the ``jpeg-to-jpg.tren`` file? Just this::
# tren Command Line
# Converts '.jpeg' (in any case mixture) file name suffix to '.jpg'
# Make the replacement case insensitive
-c # Reset this later on the command line with -C
# Only replace the rightmost instance
-i -1
# The actual replacement request
-r .jpeg=.jpg
Notice that you can stick comments in the file anywhere you like and
that they begin with ``#``. Notice also that the various options
can be entered on separate lines so it's simpler to read the include
file. If you find it useful, you can even include other include
files *in* an include file::
# Get the jpeg -> jpg suffix renaming
-I jpeg-to-jpg.tren
# Let's make it fancy
-i -1 -r .jpg=.fancy.jpg
If you do this, take care not to create a circular include. This can
happen when an include file tries to include itself, either directly,
or via another include file. **tren** limits the total number of
includes to a very large number. If it sees that the number has been
exceeded, it suspects a circular include and will issue an error
message to that effect and exit.
You can insert include options anywhere you like on the command line
and you can have as many as you like (up to a VERY large number you'll
never hit in practice). Each include reference will be replaced with
the contents of that file *at the position it appears on the command
line*.
If you find yourself using certain options most- or every time you use
the program, you can put them in the **$TREN** environment variable.
**tren** picks this up every time it starts. This minimizes errors
and reduces typing tedium. Just keep in mind that some options can be
overriden later on a command line, and some cannot. For instance,
suppose you do this::
export TREN=-f -c
The ``-c`` option to ignore case can be undone on the command line
with a ``-C`` option. However, the ``-f`` option cannot be undone.
So ... choose the options you want to make permanent in the
environment variable wisely.
Renaming Basics
===============
**tren** supports a variety of renaming mechanisms. The one thing
they have in common is that they're built with one or more *renaming
requests* that will be applied to one or more file- or directory
names. Renaming requests look like this on the **tren** command
line::
tren.py ... -r old=new ... -r old=new ... list of files/directories
No matter how complicated they look, the basic logic of the
renaming request stays the same: "When you find the string
``old`` in the file- or directory name, change it to the string
``new``.
The ``old`` and ``new`` renaming strings are built using a variety of
building blocks:
============================= =============================
*Old Strings Are Built With:* *New Strings Are Built With:*
----------------------------- -----------------------------
Literal Text Literal Text
Regular Expressions Renaming Tokens
Renaming Tokens
============================= =============================
You can use any of these building blocks alone or combine them
to create expressive and powerful renaming schemes.
Literal String Substitution
===========================
Literal String Substitution is just that - it replaces one literal
string with another to rename the target file or directory. This is
the most common, and simplest way to use **tren**. This is handy when
you have files and directories that have a common set of characters in
them you'd like to change. For instance::
tren.py -r .Jpeg=.jpg *.Jpeg
This would rename all files (or directories) whose names contained the
string ``.Jpeg`` and replace it with ``.jpg``. Well ... that's not
quite right. Unless you specify otherwise with the ``-i`` option,
*only the first (leftmost) instance of ``old`` is replaced with
``new``*. So, for example, if you started out with the file,
``My.Jpeg.Jpeg`` and ran the command above, you'd end up with a new
file name of ``My.jpg.Jpeg``
You can omit either ``old`` or ``new`` strings in a renaming
specification, but never both.
If you omit the ``old`` string, you're telling **tren** to *change the
whole file name*::
tren.py -r =MyNewFilename foo # New Name: MyNewFilename
Be careful with this one. If you apply it to a list of files or
directories, it's going to try and name them all to the *same* name.
By default, **tren** will refuse to overwrite an existing filename, so
it will stop you from doing this. If you absolutely insist on this
via the ``-f`` option, you'll get a bunch of files ending with
``.backup``. Say you have files ``a``, ``b``, and ``c``::
tren.py -fr =NewName a b c
When the command completes, the files will have been renamed
in this fashion::
a -> NewName.backup.backup
b -> NewName.backup
c -> NewName
If you omit the ``new`` string, you're telling **tren** to *remove*
the leftmost instance of ``old`` string (or other instances via the
``-i`` option described below) from the file- or directory name. For
example::
tren.py -rfoo= foo1-foo2-foo3.foo4 # New name: 1-foo2-foo3.foo4
If you try to omit *both* ``old`` and ``new`` strings, you're
effectively telling **tren** to change the existing file name to
... nothing (a null string). This is impossible because file names
must be at least one character long. **tren** enforces both this
minimum length AND the maximum legal length of new file names. It
will print an error and exit if your renaming attempt would violate
either of these limits. (As of this writing, the maximum file- or
directory name length allowed by the operating systems on which
**tren** runs is 255 characters.)
Substitution Instances
======================
As we just saw above, sometimes the ``old`` string appears in several
places in a file- or directory name. By default, **tren** only
replaces the first, or leftmost "instance" of an ``old`` string.
However, using the ``-i`` option you can specify *any* instance you'd
like to replace. In fact, you can even specify a *range* of instances
to replace.
Instances are nothing more than *numbers* that tell **tren** just
where in the name you'd like the replacement to take place. Positive
numbers means we're counting instances from the *left* end of the
name. The leftmost instance is 0 (not 1!!!).
You can also count *backwards* from the right end of the string using
negative numbers. -1 means the last instance, -2 means next-to-last,
and so on. In summary, counting from the left starts at zero and
counting from the right starts at -1.
Suppose you have a file called::
foo1-foo2-foo3.foo4
The leftmost ``foo1`` is instance 0 of old string ``foo``. It is also
instance -4. The rightmost ``foo4`` is instance 3 of old string
``foo``, and also instance -1.
You can specify a *single instance* to replace::
tren.py -i 1 -r f=b foo1-foo2-foo3.foo4 # New name: foo1-boo2-foo3.foo4
tren.py -i -1 -r f=b foo1-foo2-foo3.foo4 # New Name: foo1-foo2-foo3.boo4
You can also specify a *range of instances* to replace using the
notation::
-i first-to-replace:stop-here
All instances from the "first-to-replace" up to, *but NOT including*
"the stop-here" are replaced::
tren.py -i 1:3 -r f=b foo1-foo2-foo3.foo4 # New Name: foo1-boo2-boo3.foo4
tren.py -i -4:-2 -r f=b foo1-foo2-foo3.foo4 # New Name: boo1-boo2-foo3.foo4
``-i :`` means "replace *all* instances::
tren.py -i : -r f=b foo1-foo2-foo3.foo4 # New Name: boo1-boo2-boo3.boo4
You can also use *partial range specifications*::
tren.py -i 1: -r f=b foo1-foo2-foo3.foo4 # New Name: foo1-boo2-boo3.boo4
tren.py -i :-2 -r f=b foo1-foo2-foo3.foo4 # New Name: boo1-boo2-foo3.foo4
Note that you cannot specify individual, non-adjacent instances.
There is no way to use a single **tren** command to replace, say, the
only the 2nd and the 4th instance of an ``old`` string. Doing that
requires two renaming requests. The good news is that we can do them
both on a single **tren** invocation.
Multiple Substitutions
======================
You can put as many renaming requests on a **tren** command line as
you like (.... well, up to the length limit imposed by your operating
system and shell, anyway). As we just saw, this can be handy when
a single renaming request can't quite do everything we want.
BUT ... there's a catch. In designing your renaming requests,
you have to keep in mind that **tren** processes the command
line *from left to right*, incrementally constructing the new name
as it goes. For instance::
tren.py -r foo=bar -r foo=baz foo1-foo2-foo3.foo4
Produces ... wait a second ... why on earth are there two renaming
requests with identical ``old`` strings on the same command line?
Shouldn't this produce a final name of ``baz1-foo2-foo3.foo4``?
Nope. After the leftmost renaming request has been processed,
the new name is ``bar1-foo2-foo3.foo4``. Remember that, by
default, **tren** only replaces the *leftmost* or 0th instance
of an ``old`` string. So, when the second renaming request is
processed, the instance 0 of ``foo`` is now found in the
string ``foo2``. So, the final name will be, ``bar1-baz2-foo3.foo4``.
The lesson to learn from this is that multiple renaming requests
on the command line will work fine, but you have to do one of
two things (or both):
1) Make sure you're tracking what the "intermediate" names
will look like as the new file name is being constructed,
renaming request, by renaming request.
2) Make sure the renaming requests operate on completely
disjoint parts of the file name.
.. TIP:: Similarly, **tren** remembers the last state of each option
as you move from left to right on the command line. For instance::
tren.py -i1 -r f=F -r o=O foo1-foo2-foo3.foo4
You might be tempted to believe that this would produce,
``fOo1-Foo2-foo3.foo4``, but it doesn't. It produces,
``foO1-Foo2-foo3.foo4`` instead because the ``-i 1`` appears
prior to *both* renaming requests and thus applies to each
of them. If you want the first instance of "o" to be
replaced, you need a command line like this::
tren.py -i1 -r f=F -i0 -r o=O foo1-foo2-foo3.foo4
This sort of thing is generally true for *all* options, so
be sure they're set the way you want them to the left of a
renaming request.
As a practical matter, this can get really complicated to track. If
in doubt, it's always better to run two separate **tren** commands in,
say, a shell script to make the renaming explicit, rather than to
obscure things with clever command line trickery.
So, let's go back to our example from the previous section. We
want to replace the 2nd and 4th instances of the string "foo"
in our file name. We do this with two renaming requests on the
same command line, considering what each one does to the name
as it is encountered::
tren.py -i1 -r foo=bar -i2 -r foo=bar foo1-foo2-foo3.foo4
More About Command Line Pitfalls
================================
As we just saw, you can get surprising results as **tren** works its
way through the command line from left to right. There are other
potential pitfalls here, so it's helpful to understand just *how*
**tren** processes your command line, step-by-step:
1) Prepend the contents of $TREN to the user-provided command line.
This allows you to configure your own default set of options so
you don't have to type them in every time.
2) Resolve all references to include files.
This has to be done before anything that follows, because
include files add options to the command line.
3) Build a table of every file name to be renamed.
We'll need this information if any of the renaming requests use
the file attribute- or sequence renaming tokens (discussed
later in this document).
4) Build a table containing each renaming request storing the
current state of every program option at that point on the
command line.
This allows **tren** to apply options differently to different
renaming requests on the same command line. This came in handy
in our example of the previous section.
5) Resolve any renaming tokens found in either the ``old`` or
``new`` portions of the renaming request.
At this point, both ``old`` and ``new`` are nothing more than
simple strings, although ``old`` may be interpreted as a
regular expression rather than literally if the option to do so
is in effect.
6) Process each file found on the command line in left to right
order, applying each renaming request, in the order it appeared
from left to right on the command line.
Simple eh? Well, mostly it is ... until it isn't. As we just saw,
incrementally building up a new name with multiple renaming requests
can produce unexpected results and we have to plan for them.
Similarly, you can inadvertently accidentally give a file the *wrong
name entirely* ... this is usually a Bad Thing.
Say you have two files, ``x`` and ``y``. You want to rename ``x`` to
``y`` and ``y`` to ``z1``. Well, order matters here. Say you do
this::
tren.py -fr x=y -r y=z1 x y
Let's see what happens in order:
1) File ``x`` renaming::
x -> y
y -> z1
So, file ``x`` is renamed ``z1`` (!)
2) File ``y`` renaming::
y -> z1 .... oops, x1 exists, we need a backup
z1 -> z1.backup
y -> z1
Um ... not quite what we wanted. However, if we shuffle around the
order of renaming arguments AND the order in which to process the
files, we can get what we want::
tren.py -r y=z1 -r x=y y x
Notice that we can drop the ``-f`` option because there is no longer a
naming conflict (see the next section for more about forced renaming).
.. TIP:: Always remember" **The Rightmost Renaming Request "Wins"!**
The point here, as we've said already, is that you have to be very
careful when constructing command lines, keeping track of options, and
*what order* you specify both renaming requests *and* the files- and
directories to be renamed. As always, the simple way around this is
to run multiple, separate **tren** commands, each with its own single
renaming request.
Forcing Renaming
================
By default, **tren** will not allow you to perform a renaming operation
if the new name already exists. For example, say you have three files,
``a``, ``aa``, and ``b``, and you try this::
tren.py -r a=b a aa b
**tren** will skip the renaming of file ``a`` because a file named
``b`` already exists. It will, however, continue to run and rename
``aa``, to ``ba``.
This is designed to prevent you from accidentally clobbering files
that already exist. You can, however, override this default behavior
and *force* the renaming to take place in such situations, using the
``-f`` option. Even then, the existing file isn't lost, it is simply
*renamed itself* by appending the suffix ``.backup`` to its original
name. That way, if you made a mistake, you haven't lost the original
file. So, in our example above, the command becomes::
tren.py -fr a=b a aa b
When it's done, we end up with these files::
b # The original 'a' file
b.backup # The original 'b' file
ba # The original 'aa' file
If you don't like the suffix, ``.backup``, you can change it to any
string (of length 1 or greater) via the ``-S`` option::
tren.py -S .bku -fr a=b a aa b
Now the backed up file will be named ``b.bku``.
**tren** will even backup files that are themselves backups. This can
be handy if your renaming request ends up mapping more than one file- or
directory name to the same new name::
tren.py -fr =newname a b c
This produces files named::
newname # The original 'c' file
newname.backup # The original 'b' file
newname.backup.backup # The original 'a' file
You can inhibit this behavior and prevent backups with the ``-b``
option. This effectively *erases the original file- or directory of
that name*. This is **very dangerous** and should rarely be used.
It's better to do the backups and delete them later when you're sure
you do not need them. The underlying operating system rules for
renaming will still apply in this case. For instance, most OSs will
not allow you rename a file over the name of an existing directory and
vice versa.
.. NOTE:: The Unix ``mv`` command will allow you to move a file
*into* a directory::
mv file dir
However, this is an ``mv`` "move" semantic, and is not
properly a renaming operation. The underlying file system
will not permit a file to be renamed over a directory or
vice versa. **tren** reflects this OS semantic ... it's not
intended to be a reimplementation of ``mv``.
Ignoring Case
=============
"Literal" string substitution means just that - **tren** must find an
exact instance of ``old`` in the file name being renamed and replace
it with ``new``. So, the default is to do *case sensitive* matching.
There are times, however, when you want to ignore case when doing this
matching. For example, suppose you have file names with a variety of
suffixes in various case combinations like ``.jpeg``, ``.Jpeg``, and
``.JPEG``. Suppose you'd like these to all be changed to ``.jpg``.
Rather than having to do three separate renaming operations it's handy
to just ignore case *when matching the old string for replacement*.
That's what the ``-c`` option is for::
tren.py -i -1 -c -r.jpeg=.jpg *.jpeg *.Jpeg *.JPEG
Notice that the case insensitivity only applies to the *matching* of
the ``old`` string. Once **tren** has determined such a match exists,
the ``new`` string is used *literally* with case intact.
You can turn case sensitivity on- and off for various renaming
requests on the same command line. ``-C`` turns case sensitivity on,
and - as we just saw - ``-c`` turns it off::
tren.py -cr X=y -Cr A=b ...
The ``X=y`` renaming request will be done in a case insensitive
manner, whereas the ``A=b`` will be done only on literal instances of
upper case ``A`` in the target file names.
The Strange Case Of Mac OS X And Windows
========================================
Mac OS X and Windows have an "interesting" property that makes case
handling a bit tricky. Both of these operating systems *preserve*
case in file and directory names, but they do not *observe* it. (It
is possible to change this behavior in OS X when you first prepare a
drive, and make the filesystem case sensitive. This is rarely done in
practice, however.)
These OSs show upper- and lower- case in file names as you request,
but they do not *distinguish* names on the basis of case. For
instance, the files ``Foo``, ``foo``, and ``FOO``, are all the
same name in these operating systems, and only one of these can exist
in a given directory. This can cause **tren** to do the unexpected
when your renaming command is doing nothing more than changing case.
Suppose you start with a file called ``Aa.txt`` and run this
command::
tren.py -rA=a Aa.txt
**tren** will immediately complain and tell you that the file
``aa.txt`` already exists and it is skipping the renaming. Why?
Because from the point-of-view of OS X or Windows, ``aa.txt`` (your
new file name) is the same as ``Aa.txt`` (your original file name).
You can attempt to force the renaming::
tren.py -frA=a Aa.txt
Guess what happens? Since **tren** thinks the new file name already
exists, it backs it up to ``aa.txt.backup``. But now, when it goes
to rename the original file ... the file is *gone* (thanks to the
backup renaming operation)! **tren** declares an error and
terminates.
This is not a limitation of **tren** but a consequence of a silly
design decision in these two operating systems. As a practical
matter, the way to avoid this issue is to never do a renaming
operation in OS X or Windows *that only converts case*. Try
to include some other change to the filename to keep the
distinction between "old name" and "new name" clear to the
OS. In the worst case, you'll have to resort to something like::
tren.py -rA=X Aa.txt
tren.py -rX=a Xa.txt
Using Regular Expressions
=========================
Ordinarily **tren** treats both the old string you specify with the
``-r`` option *literally*. However, it is sometimes handy to be able
to write a regular expression to specify what you want replaced. If
you specify the ``-x`` option, **tren** will treat your old string as
a regular expresion, compile it (or try to anyway!) and use it to
select which strings to replace. This makes it much easier to rename
files that have repeated characters or patterns, and groups of files
that have similar, but not idential strings in their names you'd like
to replace.
Say you have a set of files that are similar, but not identical in
name, and you want to rename them all::
sbbs-1.txt
sbbbs-2.txt
sbbbbbbbbs-3.txt
Suppose you want to rename them, replacing two or more instances of
``b`` with ``X``. It is tedious to have to write a separate literal
``-r old=new`` string substitution for each instance above. This is
where regular expressions can come in handy. When you invoke the
``-x`` option, **tren** understands this to mean that the ``old``
portion of the replacement option is to be treated as a *Python style
regular expression*. That way, a single string can be used to match
many cases::
tren.py -x -r bb+=X *.txt
This renames the files to::
sXs-1.txt
sXs-2.txt
sXs-3.txt
Keep in mind that a literal string is a subset of a regular
expression. This effectively means that with ``-x`` processing
enabled you can include *both* regular expressions and literal text in
your "old string" specification. The only requirement is that the
string taken as a whole must be a valid Python regular expression. If
it is not, **tren** will display an error message to that effect.
For more detail on the Python regular expression syntax, see:
http://docs.python.org/library/re.html
Because Python regular expressions can make use of the ``=`` symbol,
you need a way to distinguish between an ``=`` used in a regular
exression and the same symbol used to separate the old and new
operands for the ``-r`` option. Where this symbol needs to appear in
a regular expression, it has to be escaped like this: ``\=``.
As with literal string renaming, regular expression renaming requests
honor both the case sensitivity options (``-C`` and ``-c``) as well
as the instance option, ``-i``. So, for example::
tren.py -x -ci -1 -r Bb+=X sbbsbbbsbbbbsbbbbbs
You'll rename the file to ``sbbsbbbsbbbbsXs``
Changing The Renaming Separator & Escape Characters
===================================================
There may be times when the default renaming separator (``=``) and/or
escape character (``\``) make it clumsy to construct a renaming
request. This can happen if, say, either the old- or new string in a
literal renaming needs to use the ``=`` symbol many times. Another
case where this may be helpful is when constructing complex regular
expressions that need to make use of these characters.
The ``-R`` and ``-P`` options can be used to change the character
used for renaming separator and escape character respectively. You
can use any character you like (these must be a single character
each), but bear in mind that the underlying operating system
understands certain characters as being special. Trying to use them
here will undoubtedly deeply confuse your command shell, and possibly
your file system. For example, the ``/`` character is used as a
path separator in Unix-derived systems. It's therefore a Really Bad
Idea to try and use it as a renaming separator or escape character.
Interactive Renaming
====================
By default, **tren** attempts to perform all the renaming requests on
all the file- and directory names given on the command line
automatically. It is sometimes helpful to work *interactively*
wherein you're asked what to do for each proposed renaming.
Interactive renaming is requested via the ``-a``, "ask" option::
tren.py -a -rfoo=Bar foo1.txt foo2.txt foo3.txt
**tren** will compute each file's proposed new name and ask you
what you want to do. You have 4 possible choices::
N, n, or Enter - No, don't rename this file
Y, y - Yes, rename the file
! - Yes, rename this and all remaining files without asking any more
Q, q - Quit the program
There is one slight subtlety here to watch for when doing forced
renaming. As we've seen, if you select the ``-f`` option and the new
file name already exists, **tren** will backup the existing file name
before doing the renaming. In interactive mode, you will be asked
whether or not to proceed with the renaming both for the file in
question *and for any consequenent backups*. If you decline to do the
backup but accept the primary renaming, this will have the same effect
as the ``-b`` option: The existing file- or directory will be
overwritten by the renaming operation.
If the ``-b`` option is selected in interactive mode, then you'll only
be prompted for the primary file renamings (because ``-b`` suppresses
the creation of backups).
An Overview Of Renaming Tokens
==============================
**tren** implements the notion of *renaming tokens*. These can
be a bit complex to grasp at first, so we'll introduce them
"gently" in the next few sections and then dive into the detail
thereafter.
It is sometimes useful to be able to take a group of files or rename
them using some property they possess like creation date, size,
owner's name, and so on. This is the purpose of renaming tokens.
Renaming tokens are nothing more than special symbols that represent
"canned" information **tren** knows about the file- or directory
being renamed, information from the OS itself, and information used to
sequence or order the files being renamed.
For instance, if you insert the ``/MYEAR/`` token into a old- or new
string definition, **tren** will replace it with *the year the file or
directory being renamed was last modified* and use that string in the
renaming process::
tren.py -ryear=/MYEAR/ My-year.txt # New name: My-2010.txt
Renaming tokens can appear in either the ``old`` or ``new`` string
components of a ``-r`` renaming argument. Wherever they appear,
they are "resolved" by **tren** before any renaming is attempted.
By "resolved", we mean that the renaming token will be *replaced
with a string that represents its meaning*. For example::
tren.py -i : -r boo=/SIZE/ boors-and-boots.txt
This replaces all the instances of the literal string ``boo`` with
the *length* of the file ``boors-and-boots.txt``. When we're done
the file will be renamed something like::
23rs-and-23ts.txt
This is a silly example but it serves to illustrate the point -
all renaming tokens get turned into *strings* before any renaming
is attempted.
.. NOTE:: Deep under the covers of it all, **tren** really only
knows how to do string replacement. That is, it can
replace some ``old`` string with some ``new`` string.
All the rest of the features you see are sort of
syntactic sugar to make it easy for you to express your
renaming intent. When **tren** runs, it must resolve all
that fancy syntax and boil it down to creating a new file
name the underling operating system knows how to produce
via its renaming services.
A really handy way to use renaming tokens is to name your files in a
particular *order*. For example, suppose you and your friends pool
your vacation photos but each of your cameras uses a slightly
different naming scheme. You might want to just reorder them by the
date and time each picture was taken, for example. That way you end
up with one coherent set of named and numbered files. You might start
with something like this::
DSC002.jpg # Bob's camera, taken 1-5-2010 at noon
dc0234.Jpg # Mary's camera, taken 1-5-2010 at 8am
032344.jpeg # Sid's camera, taken 1-3-2010 at 4pm
It would be nice to get these in order somehow. We can, by combining
*attribute* renaming tokens (that know things about the file being
renamed) and *sequence* renaming tokens (that know how to order all
the files being renamed by some key like date, length, who owns it,
and so on)::
tren.py -r =/MYEAR//MMON//MDAY/-MyVacation-/+MDATE::0001/.jpeg *.jp*
Every place you see something in the form ``/.../``, think, "That is a
renaming token whose value will be filled in by **tren**." This
syntax is the same whether you're using an *attribute*-, *system*-, or
*sequence* renaming token.
This would rename all the files in the current directory ending with
``.jp*``. The ``/MYEAR/...`` would be replaced with the *date* the
picture was taken ( well, actually, the date the file was last
modified). The ``/+MDATE::0001/`` refers to a *starting sequence
number* to uniquely identify files modified on the same date. The
other strings, ``-MyVacation-`` and ``.jpeg``, are inserted
*literally* in the final file names. After we ran this command, the
files above would end up with these names::
20100103-MyVacation-0001.jpeg # Sid's
20100105-MyVacation-0001.jpeg # Mary's
20100105-MyVacation-0002.jpeg # Bob's
Notice that the files taken on the same date have been sequenced by
the time-of-day they were taken because we included the
``/+MDATE.../`` sequence renaming token in our pattern. The ``+``
here means to construct the sequence in *ascending* order. A ``-``
would specify *descending* order.
.. Note:: Notice that there is *no old string* in our example above.
That is, there is nothing to the left of the ``=`` symbol in
the ``-r`` option. This effectively means "replace
everything" in the existing file or directory name with our
newly concocted naming scheme.
Of course, you don't *have* to replace the entire filename when
using tokens. It's perfectly legitimate to replace only
a portion of the existing name::
tren.py -r file=/MYEAR/MMON//MDAY/-file file-1 file.2
This would rename our files to: ``20100101-file-1`` and
``20100101-file.2`` Notice that we combined literal text and a renaming
token to do this.
You can even use renaming tokens in your *old string* specification.
For instance, suppose you manage a number of different systems and you
set their system name in an environment variable called ``SYSNAME`` and
this same name is used to identify backup files. You might then do
something like this::
tren.py -xr '/$SYSNAME/.*bku$=/FNAME/.old' *
If your system name was "matrix", then the command above would only
rename files whose names began with ``matrix`` and ended with ``bku``.
If your system name were "morton", then the command above would only
rename files whose names began with ``morton`` and ended with ``bku``.
Notice that we combined a reference to an environment variable within
a regular expression. This was done to do the match on "names
beginning with... and ending with ...". Also notice that the renaming
token ``/FNAME/`` is just the *original name of the file*.
In order for this to work, we had to single quote the renaming
request. This is because Unix shells will themselves try to replace
``$SYSNAME`` which is not what we want. If we don't single quote
(thereby turning off shell variable interpolation) and run this, say,
on a machine called "matrix", the command will be handed to **tren**
looking like this::
tren.py -xr /matrix/.*.bku=/FNAME/.old *
**tren** will then promptly error out and tell you that it doesn't
know about a renaming token called ``/matrix/``.
There are a several things to keep in mind when doing things like
this:
1) The ``/$SYSNAME/`` in the ``old`` string is used to *find the
text to rename*, whereas the same renaming token in the ``new``
string means *insert the contents of that environment variable
here*.
2) Renaming tokens are always evaluated *before* any regular
expression processing takes place. It's up to you to make sure
that when the two are combined (as we have in the example above),
*that the final result is still a valid Python regular
expression*. This may involve explicit quoting of the renaming
tokens used in the ``old`` string specification.
**tren** has many other kinds of renaming tokens. Their structure and
use is described in some detail in the section below entitled
`Renaming Tokens: The Gory Details`_.
Renaming Token Pitfalls
=======================
As we saw in earlier sections, **tren** command line option and file
name interaction can be tricky. It can depend on order and on whether
the various renaming requests "collide" with each other as a new file
name is computed. A similar potential collision exists between
renaming tokens and renaming requests. Recall from `More About
Command Line Pitfalls`_ that renaming tokens are resolved *before* a
renaming request is processed. This means that the string
substitution (literal or regular expression) of the renaming operation
can *conflict with the characters returned when the renaming token was
resolved*. For example, suppose we do this::
tren.py -r =New-/FNAME/ -r My=Your MyFile.txt
The first renaming request computes the name ``New-MyFile.txt``.
However, the second renaming request further modifies this to
``New-YourFile.txt``. In effect, the second renaming request is
*overwriting part of the string produced by the renaming token
reference*. This is an intentional feature of **tren** to allow
maximum renaming flexibility. However, you need to understand how it
works so you don't get unexpected and strange results. For example,
look what happens when you reverse the order of the renaming requests
in this case::
tren.py -r My=Your -r =New-/FNAME/ MyFile.txt
``My`` gets replaces with ``Your``, but as soon as the second renaming
request is processed, the whole string is thrown away and replaced
with the final name ``New-MyFile.txt``. This is yet another
example of, **"The Rightmost Renaming Request Wins!"**
Renaming Tokens: The Gory Details
=================================
As we've just seen, a *renaming token* is nothing more than
a string representing something **tren** knows about. These
fit in one of three categories:
- An attribute of the file or directory being renamed
- An attribute of the underlying operating system environment
- A sequence that reflects some ordering principle
Renaming tokens are delimited by ``/`` characters, in the form::
/RenTokenName/
**tren** replaces these tokens with the corresponding information (see
descriptions below) wherever you indicated in either the ``old`` or
``new`` strings of a ``-r`` rename command.
Currently, **tren** defines a number of renaming tokens. Future
releases of **tren** may add more of these, so it's good to
periodically reread this material.
What's The Difference Between An "Attribute" And A "Sequence"?
==============================================================
Some renaming tokens return *attributes* (of either a file or
the underling operating system). Some return *sequences*. So,
what's the difference?
An "attribute" is a *value* associated with the file- or
directory being renamed (or something about the underlying
operating system). It could be the length of the file, the
last year it was modified, and so on. For example, ``/MYEAR/``
returns the year the file being renamed was last modified,
``/SIZE/`` returns the length of the file, and ``/FNAME/``
returns the original name of the file before renaming.
So, if we do this::
tren.py -r=/FNAME/-/MYEAR/-/SIZE/ file, file ...
Every file will be renamed in the form of::
original_name-YYYY-length # Example: myfile-2010-4099
In short, attributes are just string substitutions wherein the string
tells you something about the file or system on which you're working.
"Sequences", on the other hand, are just *numbers that represent some
ordering principle*. Say you use the sequence renaming token ordered
by size, ``/+SIZE::001/`` to rename 10 files of different sizes::
tren.py -r=/+SIZE::01/-/FNAME/ file, file, ...
This will produce a new set of files named like this::
01-original_name
02-original_name
03-original_name
...
10-original_name
Where, ``01-original_name`` will be the *shortest length* file
and ``10-original_name`` will be the *longest length* file.
In short, sequences are just strings of numbers used to put
things in some order.
You can always tell the difference between an attribute- and sequence
renaming token, because sequence renaming tokens always start with
either a ``+`` or ``-`` sign (to indicate ascending or descending
counting respectively). This distinction is important because some
attribute- and sequence renaming tokens share the same name. For
instance, ``/FNAME/`` is an attribute token representing the *original
name* of the file before it was renamed. However, ``/+FNAME::003/``
is a sequence renaming token that returns the *position* (order) of
the file name in alphabetic order starting counting from ``003``.
Although they are both based on the file name (hence the common
renaming token symbol), they do very different things.
How **tren** Uses File Metadata
================================
To keep track of all these attributes and/or to compute sequences,
**tren** needs the so-called "metadata" associated with the files- and
directories you've named on the command line. This metadata includes
information like who owns them, how long they are, what date they were
modified, and so on. (This information is commonly described in a
data structure called ``stat``. Even non-Unix systems like Windows
have some version of this data structure.)
The file attribute- and sequence renaming tokens are built on this
metadata, so it's worth taking a moment to understand just *how*
it is used. **tren** keeps track of the following information
for every file- or directory you've named on the command line:
- The order the file appears on *the command line*
- The order the file appears *alphabetically*
- The *original name* of the file before any renaming took place
- The date/time it was last *accessed*
- The date/time it was last *modified*
- The date/time its directory entry (inode) was last *modified*
- The *inode number* for the file
- The *device number* where the directory entry (inode) lives
- The *numeric group ID* the file belongs to
- The *name of the group* the file belongs to
- The *numeric user ID* of the file owner
- The *name of the user* that owns the file
- The *mode or permissions* for the file
- The *number of links* to the file
- The *size* of the file
**tren** then later uses this information to resolve file attribute
renaming tokens, compute the value of a particular sequence renaming
token and so on as it finds them in your renaming requests. For
example, a sequence renaming token based on group *name* will order
the sequence *alphabetically by group name* whereas one based on
*group ID* will order it numerically.
It is likely that you'll only be interested in a small subset of
these. For completness, though, **tren** keeps track of all the
metadata available about the files- or directories named on the
command line and makes it available in the form of renaming tokens.
Most commonly, you'll find yourself using the command line,
alphabetic, original name, length, and various time/date renaming
tokens.
General Attribute Renaming Tokens
=================================
These tokens are derived from information about the file or
directory being renamed.
.. NOTE:: **Windows Users Take Note!**
**tren** is portable across many operating systems because
it is written in the Python programming language. Python
*mostly* works the exact same way everywhere. However,
Windows presents some problems because it does not quite
work the same way as Unix-derived OSs do. In particular, if
you need to make use of the ``/GROUP/`` or ``/USER/``
renaming tokens on Windows, consider installing the
``win32all`` extensions to your Windows Python installation.
If you don't, **tren** will base its order on the generic
names ``WindowsUser`` and ``WindowsGroup`` which it will
apply to every file- or directory under consideration.
In any case, ``/DEV/``, ``/GID/``, ``/INODE/``, ``/NLINK/``,
and ``/UID/`` are not meaningful under Windows and default
to 0. Avoid using these tokens on Windows systems, since
these will return the same value for every file- or
directory.
``/DEV/ Returns File- Or Directory's Device ID``
This is the ID of the device containing the file being
renamed. You might want to rename files so that all the
files on a given device start with the same key. That
way, their names group together in a sorted directory
listing::
tren.py -r=/DEV/-/FNAME/ file | dir, file | dir, ...
You end up with a sorted directory listing that looks
something like::
93-...
93-...
97-...
98-...
The filenames are still preserved in our renaming reqest
above, now they're just preceded by the device ID of the
where they live with a trailing ``-`` separator.
``/FNAME/ Returns Original File- Or Directory Name``
This is the name of the file- or directory you are
renaming *before* you apply any renaming requests. This
allows you to create new names based, in part, on the old
name::
tren.py -r=/FNAME/-suffix file | dir ... # Adds "-suffix" to the end of original name
tren.py -r=prefix-/FNAME/ file | dir ... # Adds "-prefix" to start of original name
tren.py -r /FNAME/=newname file | dir ... # Same as "-r=newname"
tren.py -r /FNAME/=/FNAME/ file | dir ... # Does nothing since old- and newname are the same
``/GID/ Returns File- Or Directory's Group ID``
This is the number for the group to which the file- or
directory belongs. One way to use this is to prepend it
to every file name, thereby having all files (and or
directories) in the same group list together in a sorted
directory listing::
tren.py -r=/GID/-/FNAME/ *
``/GROUP/ Returns File- Or Directory's Group Name``
Essentially the same as ``/GID/`` except it returns the
*name* of the group rather than the number. Again, this
is useful when clustering names together in a sorted
directory listing::
tren.py -r=/GROUP/-/FNAME/ *
``/INODE/ Returns File- Or Directory's Serial Number``
This is typically an identifier to the directory entry
for the file- or directory being renamed. ``/DEV/`` and
``/INODE/`` taken together provide a unique systemwide
identifier for the file- or directory being renamed.
``/MODE/ Returns File- Or Directory's Permissions``
This is a numeric string that represents the permissions
of the file- or directory being renamed in standard Unix
format.
``/NLINK/ Returns Number Of Links To File- Or Directory Being Renamed``
Most operating systems allow a single file to have
multiple names. These names are "linked" to the instance
of the file. This replacement token is a numeric string
representing the number of such links.
``/SIZE/ Returns File- Or Directory's Length In Bytes``
This is handy if you want a sorted directory listing to
list all the files of the same size together. You simply
prepend the file- or directory's length onto its name::
tren.py -r=/SIZE/-/FNAME/ *
Now all of the files of, say, length 23 will group
together in a sorted directory listing.
``/UID/ Returns File- Or Directory's User ID``
This is the number for the user that owns the file- or
directory being renamed. One way to use this is to
prepend it to every file name, thereby having all files
(and or directories) owned by the same user cluster
together in a sorted directory listing::
tren.py -r=/UID/-/FNAME/ *
``/USER/ Returns File- Or Directory's User Name``
Essentially the same as ``/UID/`` except it returns the
*name* of the user rather than the number. Again, this
is useful when clustering names together in a sorted
directory listing::
tren.py -r=/USER/-/FNAME/ *
Time-Related Attribute Renaming Tokens
======================================
Modern operating system actually maintain three different kinds of
such timestamps, ``ATIME``, ``CTIME``, ``MTIME``:
``ATIME`` refers to the last time the file- or directory was
*accessed*.
This is updated every time the file is read.
``CTIME`` refers to the last time the file- or directory's *inode
(directory entry) was modified*.
This is updated whenever a file- or directory's permissions or
ownership are changed. It will also be updated when the file- or
directory itself is modified.
``MTIME`` refers to the last time the file- or directory *itself was
modified*.
This is updated whenever the file- or directory is closed after
modification.
**tren** implements a set of time-related file attribute renaming
tokens intended to provide full access to these various timestamps.
As a practical matter, you're most likely to use the ``MTIME``-based
tokens, but components for all three time values are available should
you need them. They are identically named, except that the first
letter of each of the time-related attribute tokens indicates which of
the three timestamps above is used to compute the value:
``/ADAY/, /CDAY/, /MDAY/ Returns Timestamp's Day Of The Month``
Returns the day of the month of the timestamp in ``dd`` format.
``/AHOUR, /CHOUR/, /MHOUR/ Returns Timestamp's Hour Of The Day``
Returns the hour of the day of the timestamp in ``hh`` format.
``/AMIN/, /CMIN/, /MMIN/ Returns Timestamp's Minute Of The Hour``
Returns the minute of the hour of the timestamp in ``mm`` format.
``/AMON/, /CMON/, /MMON/ Returns Timestamp's Month Of The Year``
Returns the month of the year of the timestamp in ``mm`` format
``/AMONTH, /CMONTH/, /MMONTH/ Returns Timestamp's Name Of The Month``
Returns the name of the month of the timestamp in ``Nnn`` format.
``/ASEC/, /CSEC/, /MSEC/ Returns Timestamp's Seconds Of The Minute``
Returns the seconds of the minute of the timestamp in ``ss`` format.
``/AWDAY, /CWDAY/, /MWDAY/ Returns Timestamp's Name Of The Day``
Returns the name of the day of the timestamp in ``Ddd`` format.
``/AYEAR, /CYEAR/, /MYEAR/ Returns Timestamp's Year``
Returns the year of the timestamp in ``yyyy`` format.
So, for example::
tren.py -r=/FNAME/-/MYEAR/-/MMON/-/MDAY/-/MMONTH/-/MWDAY/-/MHOUR/:/MMIN/:/MSEC/ foo
Might rename the file to something like::
foo-2005-01-07-Jan-Fri-01:23:33
System Renaming Tokens
======================
These tokens are derived from the underlying operating system and
runtime environment. Notice that, because command interpreters
(shells) on various systems work differently, the first two of these
have to be quoted in different ways.
``/$ENV/ Environment variable``
This token is replaced with the value of the
environment variable ``ENV``. If that variable does
not exist, the token is replaced with an empty string::
tren.py -r ='/$ORGANIZATION/'-/FNAME/ * # Unix shells
tren.py -r =/$ORGANIZATION/-/FNAME/ * # Windows shells
This prepends the organization's name to everything in
the current directory.
``/`cmd`/ Arbitrary command execution``
This token is replaced with the string returned by
executing the ``cmd`` command. Note that newlines are
stripped from the results, since they don't belong in
file names. Spaces, however, are preserved.
For instance, you might want to prepend the name of the
system to all your shell scripts::
tren.py -r ='/`uname -n`/'-/FNAME/ *.sh # Unix shells
tren.py -r ="/`uname -n`/"-/FNAME/ *.sh # Windows shells
This construct is more generally a way to synthesize
renaming tokens that are not built into **tren**. You
can write a script to do most anything you like,
execute it within the ``/`cmd`/`` construct, and plug the
results into your new file name. This effectively
provides **tren** an unlimited number of renaming
tokens.
.. WARNING:: Be *very* careful using this. It's
possible to construct bizzarre,
overly long, and just plain
chowder-headed strings that make no
sense in a file name using this
token. Moreover, if you attempt to
insert characters that don't belong
in a file- or directory name (like a
path separator), construct a file
name that is too long (or too
short), or just generally violate
something about the filesystem's
naming rules, this will cause
**tren** to abort and spit out an
error. *However*, you will not be
prevented from creating file names
that are legal but undesirable, such
as file names that begin with the
``-`` character. In other words, be
careful and be sure you know what
you're doing with this renaming
token.
.. Note:: **MORE ABOUT QUOTING** ``/$ENV/`` **AND** ``/`cmd`/`` **SYSTEM RENAMING TOKENS**
Both of these constructs are supported directly from most
Unix command shells. That is, most Unix shells will
themselves dereference constructs like ``$ENV`` and
```command```. There's no need to pass them as renaming
tokens, you can just use the shell's capabilities::
tren.py -r =/FNAME/-`uname -n`-$LOGNAME
If you do want to use the renaming token form in a Unix
shell, you *must* single quote them to prevent the shell
from "interpolating" the variables before **tren** is
called. If you don't do this, **tren** will complain about
encountering unknown renaming tokens::
tren.py -r ='/`uname -n`/'-/FNAME/ *.sh # This is correct
tren.py -r =/`uname -n`/-/FNAME/ *.sh # This will fail
The real reason for providing these renaming tokens at all
is because the Windows command interpreter does not have an
equivalent function. The *only* way to achieve what these
do on Windows is via renaming tokens. In Windows, you also
have to pay attention to quoting, particularly when there
are spaces in a ```cmd``` renaming token::
tren.py -r=/FNAME/-/`command option1 option2 argument`/ files ...
This causes **tren** to complain mightily because it thinks
``/`command``, ``option``, ``option2``, are all separate
(invalid) command line arguments. To avoid this problem,
you need to pass the renaming token as a single command line
entity via quotes::
tren.py -r=/FNAME/-"/`command option1 option2 argument`/" files ...
``/RAND#/ Random Number Generator``
This generates a (quasi) random number string, ``#``
digits wide.
This can be useful when you want to guarantee that no
renaming operation will generate a new name that
conflicts with an existing name::
tren.py -r=/MYEAR//MMON//MDAY/-/RAND10/ *
This generates new file names with a 10 character
random number string suffix::
20100401-4708910871
In this case, just make sure the random number string
is long enough to make a name collision unlikely by
picking a sufficiently large ``#``.
``#`` must be a positive integer greater than 0. The
random number generator is reinitialized each time the
program runs, so test mode operations will only show
you the "shape" of the names with the embedded random
number strings, not the actual strings you'll end up
with.
Another nice use of this feature is to "mask" the
actual file names. Say you have a bunch of encrypted
files, but you don't want a casual viewer to even know
what they are or what's in them. You might do this::
tren.py -r=/RAND25/ * 2>&1 >tren.log
Now you can encrypt ``tren.log`` and send it along with
the files themselves over a non-secure channel. The
recipient can decrypt the log, and figure out what the
original file names were, decrypt them, and store them
accordingly.
Sequence Renaming Tokens
========================
Sometimes it's useful to rename files or directories based on some
*property they possess* like the date or time of creation, the size of
the file, who owns it, and so on. That's the idea behind the
attribute renaming tokens described in the previous sections.
But another really interesting use of renaming tokens is to *order all
the files being renamed* based on one of these parameters. For
instance, instead of actually embedding the date and time of creation
in a file or directory name, you might want to order the files from
oldest to newest with a naming convention like::
file-1.txt
file-2.txt
file-3.txt
This guarantees uniqueness in the final name and also sees to it that
a sorted directory listing will show you the files or directories in
the order you care about.
This is the purpose of *sequence renaming tokens*. They give you
various ways to create sequences that can be embedded in the final
file or directory name.
.. TIP:: Many sequence renaming tokens described below share the
same name with an attribute renaming token described in
the previous sections. That's because they are based on
the same property of the file- or directory being
renamed. However, it's easy to tell which is which:
Sequence renaming tokens always begin with either ``+``
or ``-`` (to indicate ascending- and descending ordering
respectively).
So, ``/GROUP/`` is an attribute renaming token that
returns the group *name* for the file. However,
``/+GROUP.../`` is a sequence renaming token that returns
a number indicating what *position* the file is in when
all the files named on the command line are *ordered by
their group names*.
General Format Of Sequence Renaming Tokens
==========================================
Sequence renaming tokens consist of four descriptive components and
have the following general format::
/OrderingType:Counting Alphabet:Counting Pattern/
where,
Ordering (Required):
+ ascending
- descending
Type (Required):
The attribute used to create the ordering.
Counting Alphabet (Optional):
The name of the counting system to use.
Counting Pattern (Optional):
Establishes the first value in the counting
sequence and/or provides a string to format
the count.
Note that there is no space between the Ordering flag and Type.
An *Ordering* flag is mandatory. It will either be ``+`` to indicate
an ascending count or ``-`` to indicate a descending count.
The *Type* is mandatory. All available types are described in the
section below entitled, `Types Of Sequence Renaming Tokens`_.
The *Counting Alphabet* is optional. Counting alphabets are ways to
count in different bases and even to use something other than just
numbers to represent the count. These are described in the section
below entitled, `Let's Learn The Alphabet`_.
If you omit naming a specific alphabet, **tren** will default to
counting in Decimal. Note that you *cannot* omit the alphabet
delimiters, so the correct form of a sequence renaming token then
becomes::
/OrderingType::Counting Pattern/
A *Counting Pattern* is optional. Counting patterns are used to do
two things: Set the initial value for the count and Describe the
layout of how the count should look. This is described in the section
below entitled, `Counting Pattern Format`_.
If you omit a counting pattern, **tren** will start counting from the
zero-th "number" in your chosen alphabet, producing a counting pattern
as "wide" as necessary to count all the items being renamed. In that
case, the format of a sequence renaming token becomes::
/OrderingType:Alphabet:/ # With explicit alphabet
/OrderingType::/ # With default decimal alphabet
Let's Learn The Alphabet
========================
Sequence renaming tokens are essentially "counters" that return a
number string representing where the file- or directory being renamed
sits in some order - say, by time, alphabetically or on the command
line.
To be as flexible as possible in creating renaming strings, it's
helpful to be able to "count" in any *base*, and use any *set of
symbols* when counting. For instance, you may prefer sequences of
letters instead of numbers. Such a sequence might look like this::
a
b
...
z
aa
ab
...
az
ba
bb
And so on.
**tren** has a number of standard such "counting alphabets" built in
for the most common counting situations. As described in the previous
section, you specify which of these you want to use in each sequence
renaming token reference on the command line. (If you omit naming a
specific alphabet, the token will default to counting in Decimal.)
The built in alphabets are::
Binary - Counting in Base 2 using numbers
Octal - Counting in Base 8 using numbers
Decimal - Counting in Base 10 using numbers
HexLower - Counting in Base 16 using numbers and lower case letters
HexUpper - Counting in Base 16 using numbers and upper case letters
Lower - Counting in Base 26 using lower case letters
LowerUpper - Counting in Base 52 using first lower- then upper case letters
Upper - Counting in Base 26 using upper case letters
UpperLower - Counting in Base 52 using first upper- then lower case letters
.. TIP:: **The difference between a "base" and a "symbol set".**
In order to make such counting-based renamings as flexible
as possible, **tren** is built to be able to count *in any
base* (2 or higher) and *make use of any symbol set*.
What's the difference? The "base" tells you how many
symbols there are in your counting system. In Decimal, for
example, there are 10. The "symbol" set, assigns a
character to represent each of those positions. In Decimal,
we customarily use, "0", "1", "2", and so on. However,
there is nothing magical about the symbol set. It is the
*base* that defines the counting system. The symbol set is
just an arbitarary representation. For instance, there's no
reason we can count in base 10, using the symbols, ")", "!",
"#", "$", ... and so on.
This ability to use any symbol set in any base makes it easy to
construct counting strings that suit your particular renaming needs.
You do this by defining your own, custom counting "alphabet" via the
``-A`` command line option::
-A AlphabetName:string-of-characters
Once defined, later renaming tokens on the command line can refer to
it via the ``/...:AlphabetName:.../`` syntax discussed previously.
Say we do this::
tren.py -A Foo:s2X -r=/+MTIME:Foo:/ *
This will rename all the files in the current directory in ascending
``mtime`` timestamp order using the following counting scheme::
s
2
X
ss
s2
sX
2s
22
2X
And so on. You can use most any combination of characters you like to
customize your sequence renaming token output. There are a few things to
keep in mind, however:
- The counting *base* is determined by the *number of symbols in the
symbol set* not what characters you use. In the example above,
we're counting in base 3 irrespective of what symbols are used
to represent each "number".
- You can define as many new alphabets as you like on the command line.
(Well ... up to the maximum command line length limit imposed by
the shell and/or operating system you're using.)
- The alphabet name is case sensitive. ``Foo``, ``FOO``, and ``foo``
are all different alphabet names (assuming they are all defined).
- There is no requirement that the symbol set be built out of unique
characters. **tren** does no analysis of your symbol set at all,
so this is permitted (if not recommended)::
-A Foo:abcx123xj3,m2
- Similarly, you can populate your alphabet with any symbols you
like, BUT remember they're going to be embedded in some file-
or directory name. It's a good idea to make sure you avoid illegal
or undesirable characters like ``/``, ``\``, and ``-`` in your
alphabets so they don't end up getting embedded in a name (or trying
to, anyway).
- If you use non-numerical counting schemes, your sorted directory
list will not reflect that order. For example, suppose you have
a bunch of files in a directory, and you do this::
tren.py -r=/-MTIME:LowerUpper:/ *
Your files will get renamed in descending ``mtime`` timestamp order
as::
a
b
...
A
B
...
aa
And so on, where ``a`` is the oldest file- or directory. However,
when you do a sorted directory listing, the names beginning with
*upper case* characters will be listed first. Why? Because directory
sorting is typically based on ASCII order wherein ``A-Z`` appear before
``a-Z``.
Counting Pattern Format
=======================
When using sequence renaming tokens, it's nice to be able to layout
the resulting counting string in some consistent way. You can use an
optional "counting pattern" in your sequence renaming token to do
this. The renaming pattern is used to specify two things: The width
of the sequence string, and, optionally, the starting value for the
sequence. For instance::
Pattern Results
------- -------
0001 -> 0001, 0002, 0003, ...
0000 -> 0000, 0001, 0002, ...
03 -> 03, 04, 05, ...
To understand counting patterns, you have to understand a few
basic rules **tren** uses to interpret them:
- The number of characters (of any kind) in the pattern fix the
*width* of the counting string. These characters need not even be
in the counting alphabet::
tren.py -r=/+CTIME::abcde/ *
This produces files renamed in ascending ``ctime`` timestamp order
like this::
abcd0
abcd1
...
abc10
And so on.
- When a count increments such that it would exceed the width of the
pattern, it "rolls over" and **tren** issues a warning message to
that effect. Using the example above, we'd get::
9998
9999
0000 # Count rolls over and warning issued!
Notice that the count rolls over *in the selected counting
alphabet*, it does not restart from the original counting pattern.
In almost every case, you should avoid roll over and make your
counting pattern wide enough to hold a full count for all the
files- and directories you've named on the command line. One
issue here is that rolling over is possibly going to create a name
collision and the renaming will either be skipped or have to be
forced (with backup) using the ``-f`` option.
- As we've seen, **tren** treats each position of the counting
pattern as a placeholder and "eats" characters as the count goes
up. This allows you great flexibility in creating renaming
patterns that embed both a count and *a literal* string via
a single sequence renaming token. You just have to make the
counting pattern wide enough so that the highest count never
consumes your literal string::
tren.py -r=/+MTIME:HexLower:InHexMtimeOrder-0x00000/ *
This yields new file names like this::
InHexMtimeOrder-0x00000
InHexMtimeOrder-0x00001
InHexMtimeOrder-0x00002
...
Notice that the ``0x`` string may mean "this is a hex number" to
the human reader, but it is completely insignificant to **tren**.
If the count were to get large enough - bigger than 5 digits, the
``0x`` string itself would get overwritten. Larger still, and
``InHexMtimeOrder-`` would start to get consumed.
.. TIP:: We could avoid the possibility of having the count ever
consume our literal text, by taking it *out of the
sequence renaming token* and putting it in as a literal
argument to the ``-r`` option::
tren.py -r=InHexMtimeOrder-0x/+MTIME:HexLower:00000/ *
In short, **tren** treats *every character in a counting pattern
the same* - with complete indifference.
- Well ... *almost* "complete indifference". When **tren** finds
characters that are *in* the selected counting alphabet, it
*adds them to the count*. In this way we start counting at
some predermined initial value. Note that **tren** always
produces sequence number *starting with 0* and, unless the
pattern indicates otherwise::
tren.py -r=/+CMDLINE::/ a b c
Produces::
0 # Formerly a, the 1st command line argument
1 # Formerly b, the 2nd command line argument
2 # Formerly c, the 3nd command line argument
But say we wanted to start counting from 1 instead::
tren.py -r=/+CMDLINE::1/ a b c
Produces::
1 # Formerly a, the 1st command line argument
2 # Formerly b, the 2nd command line argument
3 # Formerly c, the 3nd command line argument
Similarly, ``/+CMDLINE::101/`` would produce::
101 # Formerly a, the 1st command line argument
102 # Formerly b, the 2nd command line argument
103 # Formerly c, the 3nd command line argument
Because **tren** is insensitive to characters *outside*
the counting alphabet, you can produce really interesting
counting patterns like this::
tren.py -r=/+CMDLINE::1x0/ a b c
Produces::
1x0 # Formerly a, the 1st command line argument
1x1 # Formerly b, the 2nd command line argument
1x2 # Formerly c, the 3nd command line argument
If you had enough files named on the command line, the
count would eventually consume the out-of-alphabet
characters::
1x0
...
1x9
110
111
...
So, by mixing characters that are both in- and out of the counting
alphabet in a counting pattern, you "prime" the sequence renaming
token to start counting with a certain string. This works for all
alphabets, any base, and any symbol set::
tren.py -r=/+FNAME/:Upper:+0S/ *
Yields new file names::
+0S
+0T
...
+0Z
+BA
+BB
...
- There is no notion of starting the count from a "negative number"
and counting up. You can sort of synthesize this by sticking a
``-`` in front of a sequence renaming token (or at the left end of
its counting pattern). Keep in mind, though, that **tren** only
knows how to *increment* a count so you will always get an
"increasing negative number" when you do this::
tren.py -r=-/+CMDLINE::5/-/FNAME/ a b c
Will produce new file names::
-5-a
-6-b
-7-c
If you want the reverse order, specify a descending sequence
renaming token::
tren.py -r=-/-CMDLINE::5/-/FNAME/ a b c
Will produce new file names::
-5-c
-6-b
-7-a
Types Of Sequence Renaming Tokens
=================================
Sequence renaming tokens are thus a way to generate an ordering *based
on some property common to everything being renamed*. That property
is used to return a string representing just where in that order a
particular file- or directory appears. This string is formatted
according to the counting alphabet and counting pattern embedded in
the sequence renaming token as described in the previous sections.
Keep in mind that for purposes of sequencing, **tren** *makes no
distinction between a file and directory*. It merely sequences based
on the property you requested.
.. NOTE:: There is one *very* important detail to keep in mind here.
When **tren** first starts up, it examines the metadata of
every file- and directory name on the command line. It uses
this to pre-create the sequences for every possible ordering
(alphabetic, by date, within date, by length, and so on)
*whether or not every file actually ends up being renamed
later on*. In other words, sequences are built on *the list
of names passed on the command line* NOT on the list of
files- or directories that actually get renamed. If your
renaming requests only apply to some of the file names you
passed on the command line, you may find the resulting
sequence unexpected. Say you have three files, ``a``,
``b``, and ``c`` and you do this::
tren.py -rb=/FNAME/-/+FNAME::001/ b c a
Only file ``b`` has a matching ``old`` string and thus is
the only file renamed. However, because it is second
alphabetically *of all the files named on the command line*,
it gets renamed to ``b-002``. The way to avoid this
surprise is to make sure any renaming request with sequence
renaming tokens in it is constructed so that it applies to
*all* the files- and directories named on the command line.
Sometimes, more than one file- or directory named on the command line
maps to the same sequencing key. For example, when using the
``/+GROUP.../`` sequence renaming token, dozens of files in a given
directory may only map to a few group names. In this situation, all
the names that map to the same key *will be sequenced alphabetically
within the key*. So if ``a`` and ``b`` are in group ``foo`` and
``c`` and ``d`` are in group ``baz``::
tren.py -r=/+GROUP/::/-/FNAME/ a b c d
Will create the new names::
0-c
1-d
2-a
3-b
**tren** currently supports a variety of sequence renaming tokens.
Note that those associated with the various OS timestamps begin with
the corresponding first letter:
``/+-ADATE:Alphabet:FormatField/ Sequence based on atime timestamp WITHIN the same date``
``/+-CDATE:Alphabet:FormatField/ Sequence based on ctime timestamp WITHIN the same date``
``/+-MDATE:Alphabet:FormatField/ Sequence based on mtime timestamp WITHIN the same date``
These return sequences *within* a given day. This enables
renaming constructs like::
tren.py -r=/MYEAR//MMON/MDAY/-/+MDATE::001/ *
Yielding files named::
20100305-001
20100305-002
20100305-003
20100316-001
20100316-002
20100316-003
...
``/+-ATIME:Alphabet:FormatField/ Sequence based on atime timestamp``
``/+-CTIME:Alphabet:FormatField/ Sequence based on ctime timestamp``
``/+-MTIME:Alphabet:FormatField/ Sequence based on mtime timestamp``
These return sequences in absolute timestamp order. For example::
touch foo
touch bar
touch baz
tren.py -r =/+MTIME::/-/FNAME
Yields::
foo-0
bar-1
baz-2
``/+-CMDLINE:Alphabet:FormatField/ Sequence based on the order of appearance on the command line``
This is nothing more than the command line order::
tren.py -r=/+CMDLINE/-/FNAME::01/-/FNAME/ z b a
Yields::
01-z
02-b
03-a
``/+-DEV:Alphabet:FormatField/ Sequence based on the device ID number on which the file- or directory resides``
This is the a sequence ordered by which device ID contains the file-
or directory to be renamed.
This is not supported on Windows and defaults to an alphabetic
sequence equivalent to ``/+-FNAME.../``.
``/+-FNAME:Alphabet:FormatField/ Sequence based on alphabetic order of all targets on the command line``
This returns a sequence based on the alphabetic order of everything
you've named for renaming. Note that this is done on *the fully
qualified path name for each argument*, not just the file- or
directory name itself::
tren.py -r=/+FNAME::/-/FNAME/ a/z b/b
Yields::
a/0-z
b/1-b
This is because the original file name ``a/z`` sorts alphabetically
before ``b/b``.
``/+-GID:Alphabet:FormatField/ Sequence based on the group ID number``
This returns a sequence ordered by the ID number of the group to which
the file- or directory belongs.
This is not supported on Windows and defaults to an alphabetic
sequence equivalent to ``/+-FNAME.../``.
``/+-GROUP:Alphabet:FormatField/ Sequence based on the group name``
This returns a sequence ordered by the name of the group to which the
file- or directory belongs.
This is only supported on Windows if the ``win32all`` Python extensions
are installed. Otherwise, this defaults to an alphabetic sequence equivalent to ``/+-FNAME.../``.
``/+-INODE:Alphabet:FormatField/ Sequence based on the inode number``
This returns a sequence ordered by the file- or directory inode numbers.
This is not supported on Windows and defaults to an alphabetic
sequence equivalent to ``/+-FNAME.../``.
``/+-MODE:Alphabet:FormatField/ Sequence based on permissions``
This returns a sequence ordered by the file- or directories permissions
value.
``/+-NLINK:Alphabet:FormatField/ Sequence based on the nlink count``
This returns a sequence ordered by the number of links associated
with the file- or directory.
This is not supported on Windows and defaults to an alphabetic
sequence equivalent to ``/+-FNAME.../``.
``/+-SIZE:Alphabet:FormatField/ Sequence based on size``
This returns a sequence ordered by the size of each file- or
directory.
``/+-UID :Alphabet:FormatField/ Sequence based on the user ID number``
This returns a sequence ordered by the ID number of the user that
owns the file- or directory.
This is not supported on Windows and defaults to an alphabetic
sequence equivalent to ``/+-FNAME.../``.
``/+-USER:Alphabet:FormatField/ Sequence based on user name``
This returns a sequence ordered by the name of the user that owns
the file- or directory.
This is only supported on Windows if the ``win32all`` Python extensions
are installed. Otherwise, this defaults to an alphabetic sequence equivalent to ``/+-FNAME.../``.
COMMON TASKS AND IDIOMS
-----------------------
With a program as feature dense as **tren**, it's not possible to
document every possible use case. The following examples cover many
common applications of the program.
- Literal String Replacement
Sometimes, all you want to do is replace a single
substring in a name::
tren.py -r Old=New OldRecords-OldPeople # Yields: NewRecords-OldPeople
- Replacing Or Removing All Instances Of A String
Sometimes you want to replace every instance of the string::
tren.py -i : -r Old=New OldRecords-OldPeople # Yields: NewRecords-NewPeople
- Changing A File's "Extension" Suffix
Common where the suffix of a file is significant to an applications
program::
tren.py -i -1 -r .jpeg=.jpg *.jpeg
- Replace Spaces In A Filename With Underbars
Even though spaces are allowed in file names in most OSs, they're
a pain::
tren.py -i : -r " "=_ *
- Appending- Or Prepending Strings To An Existing File Name
Often, you want to keep the existing name, but add to it::
tren.py -r =Prefix-/FNAME/
tren.pu -r =/FNAME/-Suffix
- Ordering File Names By Last Modification Time
It's nice to be able to see files in the order they
were last modified. Usually, we preserve the old name
when doing this::
tren.py -r =/+MTIME::001/-/FNAME/
- Ordering File Names By Modification Time Within Date
Sometimes, what we want is the order of modification
*within* the date it was changed::
tren.py -r =/MYEAR/-/MMON/-/MDAY/-/+MDATE::001/-/FNAME/ *
- Ordering File Names By Size
This is handy if we want a directory listing to list the files in
size order::
tren.py -r =/SIZE/-/FNAME/ *
- Undoing A Previous Renaming
In complex renamings, sometimes the only way to get back to your
original names is to examine the renaming log. But in some cases
it's pretty automatic::
tren.py -r ='/$LOGNAME/'-/FNAME/ *
This can be undone by::
tren.py -r '/$LOGNAME/'-= *
Generally, if you can isolate the text introduced by the previous
renaming operation, and use it as the ``old`` string in another
renaming request, this will work.
ODDS AND ENDS
-------------
- Quoting your command line arguments properly for the shell you use
is critical. Things like spaces, ``\``, and ``-`` have to be
properly quoted or either the shell or **tren** itself are going to
complain. Similarly, when using the ``/$ENV/`` and ``/`cmd`/``
renaming tokens, make sure to enclose them in single quotes if
you're using a standard Unix shell like ``bash``.
- Whitespace is almost always significant *within* a **tren** option.
You'll need to put proper quoting around it to perserve if for
**tren** to see, whether in a renaming request, an alphabet
definition, or some part of a sequence renaming token.
- Most shells don't care if you leave a space between an option
and its argument. It's a really good idea to do so as a matter
of habit, especially when dealing with a complex command line
driven tool like **tren**.
- **tren** will attempt to do any requested renaming. However, if you
manage to embed some character in the new name that the operating
system doesn't like, the renaming will fail and you'll be notified
of the fact. Notwithstanding the fact that you can do all manner of
clever things with **tren**, some restraint is called for when
constructing new file- or directory names.
- **tren** will prevent you from trying to rename something to a null
string or a name too long for the operating system. Mostly this is
not an issue *unless* you managed to concoct a renaming request that
ends up requiring recursive backups. In that case, the backup
suffix can be tacked onto the file name enough times that the file
name becomes too long for the OS to catch. While **tren** can, and
does catch this, **it cannot unwind what it has done thus far and
you CAN LOSE FILES THIS WAY!!!**. The smart move here is to use
test mode and make sure your proposed renaming isn't going to
require deeply recursive backups.
- Save the output from your **tren** runs in logs. That way, if you
have to unwind a renaming gone bad, you'll have a record of what was
done.
- The use of ``-bf`` is **strongly** discouraged and is provided only
for the most sophisticated and careful users.
BUGS, MISFEATURES, OTHER
------------------------
You must be running Python 2.6.x or later. **tren** makes use of
features not supported in releases prior to this. **tren** has not
been tested with Python 3.x and is presumed not to work with it
until/unless otherwise demonstrated.
As a general matter, **tren** should run on any POSIX-compliant OS
that has this version (or later) of Python on it. It will also run on
many Microsoft Windows systems. If the Windows system has the
``win32all`` Python extensions installed, **tren** will take advantage
of them for purposes of deriving the names of the user and group that
own the file or directory being renamed.
.. WARNING:: As of this writing, **tren** will not run in the
**cygwin** environment because their version of Python
is still backleveled to 2.5.x. When and if the
**cygwin** team upgrades to 2.6.x, **tren** is expected
to work there as well.
This program is **EXPERIMENTAL** (see the license). This means its
had some testing but is certainly not guaranteed to be perfect. As of
this writing, it has been run on FreeBSD, Linux, Windows XP, and Mac
OS X. It has not, however, been run on 64-bit versions of those OSs.
If you have experience, positive or negative, using **tren** on other
OS/bitsize systems, please contact us at the email address below.
HOW COME THERE'S NO GUI?
------------------------
**tren** is primarily intented for use by power users, sys admins, and
advanced users that (mostly) find GUIs more of a nuisance than a help.
There are times, however when it would be handy to be able to select
the files to be renamed graphically. TundraWare has a freely
available file browser that is macro programmed. It will work nicely
in such applications:
http://www.tundraware.com/Software/twander/
COPYRIGHT AND LICENSING
-----------------------
**tren** is Copyright (c) 2010 TundraWare Inc.
For terms of use, see the ``tren-license.txt`` file in the
program distribution. If you install **tren** on a FreeBSD
system using the 'ports' mechanism, you will also find this file in
``/usr/local/share/doc/tren``.
AUTHOR
------
::
Tim Daneliuk
tren@tundraware.com
DOCUMENT REVISION INFORMATION
-----------------------------
::
$Id: tren.rst,v 1.182 2010/04/23 16:13:45 tundra Exp $
You can find the latest version of this program at:
http://www.tundraware.com/Software/tren
This document was produced using reStructuredText:
http://docutils.sourceforge.net/rst.html
tundra